Makita DLS714 Instruction Manual page 15

For tool without the ring
2
1
4
1. 2.
socket bolt (left-handed) 5.
For tool with the ring
2
1
4
5
1. 2.
socket bolt (left-handed) 5. Ring 6.
WARNING:
If the ring is needed to mount the
blade onto the spindle, always be sure that the
correct ring for the blade's arbor hole you intend
to use is installed between the inner and the outer
result in the improper mounting of the blade causing
blade movement and severe vibration resulting in
possible loss of control during operation and in seri-
other than 20 mm or 15.88 mm hole-
diameter saw blade
part on one side of it and a different diameter of blade mount-
ing part on the other side. Choose a correct side on which
3
5
3. 4. Hex
3
6
3. 4. Hex
15 ENGLISH
2
1
4
1. 2.
socket bolt (left-handed) 5.
ing part
CAUTION:
Make sure that the blade mounting
Mounting the blade on the wrong side can result in
the dangerous vibration.
Dust bag
Optional accessory
The use of the dust bag makes cutting operations
cleaner and dust collection easier.
To attach the fastener, align the top end of the fastener
with the triangular mark on the dust bag.
When the dust bag is about half full, remove the dust bag from
the tool and pull the fastener out. Empty the dust bag of its
contents, tapping it lightly so as to remove particles adhering
to the insides which might hamper further collection.
1
3
1. Dust bag 2. Dust nozzle 3.
NOTE: If you connect a vacuum cleaner to your saw,
cleaner operations can be performed.
3
5
6
3. 4. Hex
6. Blade mount-
2