Makita DLS714 Instruction Manual page 11

1
2
1. 2. Guide fence
2.
the saw blade comes slightly below the cross section of
the guide fence and the top surface of the turn base.
3. Rotate the blade by hand while holding the handle all
the way down to be sure that the blade does not contact any
WARNING:
After installing a new blade and
with the battery cartridge removed, always be
sure that the blade does not contact any part of
the lower base when the handle is lowered com-
pletely. If a blade makes contact with the base it may
Stopper arm
ing screw and press down the handle fully to check the result.
1
2
1.
Sub-fence
CAUTION:
When performing left bevel cuts,
tact the blade or a part of the tool, and may result in
1.
tion the sub-fence inside. However, when performing
11 ENGLISH
2.
Otherwise, it may con-
1
-
-