Panasonic VariCam LT Operating Manual page 136

Chapter 10 Menu Operations — Menu list
Item
[SDI OUT 1] Sets the output image from the <SDI OUT 1> terminal.
Selectable items vary depending on the [MAIN] setting.
When [MAIN] is set to [V-Log] and [GRADING] is set to [Internal] or [External App]
[V-Log]/[GRADING]
When [MAIN] is set to [V-Log] and [GRADING] is set to [SHADING]
[BAKED IN]/[V-Log]
When [MAIN] is set to [V-Log] and [GRADING] is set to [OFF]
[V-Log]/[V-709]
When [MAIN] is set to [SCENE1]/[SCENE2]/[SCENE3]/[SCENE4]/[SCENE5]
[SCENE1]/[SCENE2]/[SCENE3]/[SCENE4]/[SCENE5]
When [MAIN] is set to [SHADING]
[BAKED IN]
f Factory setting: [V-Log]
[SDI OUT 2] Sets the output image from the <SDI OUT 2> terminal.
Selectable items vary depending on the [MAIN] setting.
When [MAIN] is set to [V-Log] and [GRADING] is set to [Internal] or [External App]
[V-Log]/[GRADING]
When [MAIN] is set to [V-Log] and [GRADING] is set to [SHADING]
[BAKED IN]/[V-Log]
When [MAIN] is set to [V-Log] and [GRADING] is set to [OFF]
[V-Log]/[V-709]
When [MAIN] is set to [SCENE1]/[SCENE2]/[SCENE3]/[SCENE4]/[SCENE5]
[SCENE1]/[SCENE2]/[SCENE3]/[SCENE4]/[SCENE5]
When [MAIN] is set to [SHADING]
[BAKED IN]
f Factory setting: [V-Log]
[VF SDI] Sets the output image from the <VF SDI> terminal.
Selectable items vary depending on the [MAIN] setting.
When [MAIN] is set to [V-Log] and [GRADING] is set to [Internal] or [External App]
[V-Log]/[GRADING]
f [V-Log]/[V-709] when [SURROUND VIEW SW] is set to [ON].
When [MAIN] is set to [V-Log] and [GRADING] is set to [SHADING]
[BAKED IN]/[V-Log]
When [MAIN] is set to [V-Log] and [GRADING] is set to [OFF]
[V-Log]/[V-709]
When [MAIN] is set to [SCENE1]/[SCENE2]/[SCENE3]/[SCENE4]/[SCENE5]
[SCENE1]/[SCENE2]/[SCENE3]/[SCENE4]/[SCENE5]
When [MAIN] is set to [SHADING]
[BAKED IN]
f Factory setting: [V-Log]
[DETAIL SW] Enables/disables the detail function.
[ON], [OFF]
f Factory setting: [OFF]
[DETAIL CORING] Sets the coring amount for the detail signal.
[0] - [15] (1 step)
f Factory setting: [1]
[DETAIL LEVEL] Sets the effect level for the detail signal.
[0] - [15] (1 step)
f Factory setting: [5]
[3D LUT] Sets the grading process method when [GRADING] is set to anything other than [OFF], or when [MAIN] is
set to [SHADING] and [GAMMA SELECT] is set to [V-Log].
When [GRADING] is set to anything other than [OFF], or when [MAIN] is set to [SHADING] and [GAMMA
SELECT] is set to [V-Log].
[OFF]/[V-709]/[LOADED FILE]
[FILE SEL]: Reads the 3D LUT applied when [LOADED FILE] is selected from the SD memory card.
[SAVE AS(SD CARD)]: Writes the 3D LUT applied currently to the SD memory card.
When [GRADING] is set to [OFF], or when [MAIN] is set to [SHADING] and [GAMMA SELECT] is set to
[BC GAMMA].
[OFF]
f Factory setting: [OFF]
[PLAYBACK GRADING] Sets if the grading process is applied or not on the playback video.
[OFF], [ON]
f Factory setting: [OFF]
[CDL] Sets the grading process method when [GRADING] is set to [Internal] or [External App].
When [GRADING] is set to [Internal] or [External App]
[ON]/[OFF]
[FILE SEL]: Reads the CDL setting from the SD memory card.
[SAVE AS(SD CARD)]: Writes the current CDL setting to the SD memory card.
When [GRADING] is set to [OFF] or [SHADING]
[OFF]
f Factory setting: [OFF]
[SLOPE-R] Sets the value of [SLOPE-R].
[0.50] - [2.00] (0.01 step)
f Factory setting: [1.00]
[SLOPE-G] Sets the value of [SLOPE-G].
[0.50] - [2.00] (0.01 step)
f Factory setting: [1.00]
Description of settings
– 136 –