Panasonic VariCam LT Operating Manual page 110

[MENU] settings from the viewfinder
[MENU] of the camera can be directly set with the viewfinder operation.
1
Press and hold the <CAM MENU> button of the viewfinder for at least two seconds.
The camera [MENU] is displayed.
[MENU] is also displayed on the control panel of the camera.
[EVF MENU] operation
1
Press and hold the <EVF MENU> button for at least two seconds.
[EVF MENU] is displayed.
[EVF MENU] list
r [DISPLAY SETUP]
Item
[COLOR]
[CONTRAST]
[BRIGHT]
[PEAKING]
[R BRT]
[G BRT]
[B BRT]
r [SW MODE]
Item
[FRONT TALLY]
[EYE SENSOR]
[B/W]
[SCAN]
[PIC. SIZE]
Chapter 7 Viewfinder — Viewfinder status display
Adjusts the color level.
[−32] - [31]
f Factory setting: [0]
Adjusts the contrast.
[−32] - [31]
f Factory setting: [0]
Adjusts the brightness.
[−32] - [31]
f Factory setting: [0]
Adjusts the outline of the image in the viewfinder.
[0] - [9]
f Factory setting: [0]
Adjusts the red color brightness.
[−32] - [31]
f Factory setting: [0]
Adjusts the green color brightness.
[−32] - [31]
f Factory setting: [0]
Adjusts the blue color brightness.
[−32] - [31]
f Factory setting: [0]
Switches enable/disable of the front tally lamp function.
[ON]/[OFF]
f Factory setting: [ON]
Sets sensitivity of eye sensor.
[NORMAL]: Displays the viewfinder screen according to the eye sensor.
[1min]: Keeps the viewfinder screen display for one minute after the eye sensor is released.
[5min]: Keeps the viewfinder screen display for five minutes after the eye sensor is released.
f Factory setting: [NORMAL]
Switches to monochrome mode.
[ON]: Display will be all black and white.
[OFF]: Disables the monochrome mode.
f Factory setting: [OFF]
Reverses the display.
[NORMAL]/[REVERSE]
f Factory setting: [NORMAL]
Adjusts the image size displayed in the viewfinder.
[0] - [3]
f Factory setting: [0]
– 110 –
Description of settings
Description of settings