Convenient Shooting Functions; Zebra Patterns Display; Displaying The Center Marker; Displaying The Safety Zone Marker - Panasonic VariCam LT Operating Manual

Convenient shooting functions

Zebra patterns display

The camera can display two types of zebra patterns.
The zebra pattern can be set in [MENU] → [OUTPUT SETTINGS] → [VF SDI EI ASSIST].
Item
[ZEBRA SW]
[- ZEBRA1 DETECT]
[- ZEBRA2 DETECT]
[- ZEBRA2]
[SPOT]: The image level from the setting value of [- ZEBRA1 DETECT] to the setting value of [- ZEBRA2 DETECT] is displayed in the zebra pattern.

Displaying the center marker

Displayed when [MENU] → [OUTPUT SETTINGS] → [VF SDI MARKER] → [CENTER MARKER] is set to anything other than [OFF].

Displaying the safety zone marker

The ones selected in [MENU] → [OUTPUT SETTINGS] → [VF SDI MARKER] → [SAFETY MARKER] is displayed.
Size of the safety zone marker can be changed in [MENU] → [OUTPUT SETTINGS] → [VF SDI MARKER] → [SAFETY AREA].

Displaying frame marker

Displayed when [MENU] → [OUTPUT SETTINGS] → [VF SDI MARKER] → [FRAME MARK] is set to [ON].
Set the view angle in [MENU] → [OUTPUT SETTINGS] → [VF SDI MARKER] → [FRAME SIG].
Set the level for outside in [MENU] → [OUTPUT SETTINGS] → [VF SDI MARKER] → [FRAME LEVEL].

Focus assist function

The focus assist function enables you to focus the target easily.
Enlarged display, peaking display (display with the contour in the video is framed in red), focus square display (display with the size of square displayed
in each area), and monochrome display is possible with the output video from the <VF SDI> terminal.
It is also possible to make the focusing easier by changing the aperture of the iris to decrease the depth of field.
Chapter 7 Viewfinder — Convenient shooting functions
Sets if the zebra signal is superimposed or not to the output from the <VF SDI> terminal.
[ON], [OFF]
f Factory setting: [OFF]
Sets the detection level of zebra pattern 1.
[0%] - [109%]
f Factory setting: [80%]
Sets the detection level of zebra pattern 2.
[0%] - [109%]
f Factory setting: [100%]
Enables/disables zebra pattern 2 and selects [SPOT].
[ON], [SPOT], [OFF]
f Factory setting: [OFF]
Image level
[109%]
[- ZEBRA2 DETECT]
[- ZEBRA1 DETECT]
[0%]
Description of settings
[- ZEBRA2]
[ON] [OFF]
– 112 –
[SPOT]