Panasonic VDR VDR-D220 Operating Instructions Manual
  1. Manuals
  2. Brands
  3. Panasonic Manuals
  4. Camcorder
  5. VDR VDR-D220
  6. Operating instructions manual

Panasonic VDR VDR-D220 Operating Instructions Manual

Panasonic operating instructions dvd video camera vdr-d220
Hide thumbs Also See for VDR VDR-D220:
Table of Contents

Advertisement

Quick Links

Before connecting, operating or adjusting this
product, please read the instructions completely.
Spanish Quick Use Guide is included.
Guía para rápida consulta en español está incluida.
For USA assistance, please call: 1-800-211-PANA(7262) or, contact us via the web at: http://www.panasonic.com/contactinfo
For Canadian assistance, please call: 1-800-561-5505 or visit us at www.panasonic.ca
P PC

Operating Instructions

DVD Video Camera
VDR-D220
Model No.
LSQT1146 A

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the VDR VDR-D220 and is the answer not in the manual?

Questions and answers

Related Manuals for Panasonic VDR VDR-D220

Summary of Contents for Panasonic VDR VDR-D220

  • Page 1: Operating Instructions

    Spanish Quick Use Guide is included. Guía para rápida consulta en español está incluida. For USA assistance, please call: 1-800-211-PANA(7262) or, contact us via the web at: http://www.panasonic.com/contactinfo For Canadian assistance, please call: 1-800-561-5505 or visit us at www.panasonic.ca P PC...

  • Page 2: Things You Should Know

    Things You Should Know Thank you for choosing Panasonic! You have purchased one of the most sophisticated and reliable products on the market today. Used properly, we’re sure it will bring you and your family years of enjoyment. Please take time to fill in the information on the right.
  • Page 3 Model No.: VDR-D220 Responsible party: Panasonic Corporation of North America One Panasonic Way, Secaucus, NJ 07094 Support Contact: Panasonic Consumer Electronics Company 1-800-211-PANA (7262) This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1)This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

  • Page 4: Important Safety Instructions

    IMPORTANT SAFETY INSTRUCTIONS Read these operating instructions carefully before using the unit. Follow the safety instructions on the unit and the applicable safety instructions listed below. Keep these operating instructions handy for future reference. 1) Read these instructions. 2) Keep these instructions. 3) Heed all warnings.
  • Page 5 Precautions USE & LOCATION WARNING ≥ TO AVOID SHOCK HAZARD ... Your camera and power supply should not be exposed to rain or moisture. Do not connect the power supply or operate your camera if it gets wet. Your camera has been designed for outdoor use, however it is not designed to sustain direct exposure to water, rain, sleet, snow, sand, dust, or a direct splashing from a pool or...
  • Page 6 Battery pack (Lithium ion battery pack) ≥ Use the specified unit to recharge the battery pack. ≥ Do not use the battery pack with equipment other than the specified unit. ≥ Do not get dirt, sand, liquids, or other foreign matter on the terminals. ≥...
  • Page 7 -If you see this symbol- Information on Disposal in other Countries outside the European Union This symbol is only valid in the European Union. If you wish to discard this product, please contact your local authorities or dealer and ask for the correct method of disposal. ≥...

  • Page 8: Table Of Contents

    Contents Before using Features ... 10 Quick Guide ... 12 Accessories ... 15 Parts identification and handling ... 15 Using the LCD monitor ...18 Using the viewfinder ...18 Discs and cards... 19 Discs that can be used on this unit...19 Cards that you can use with this unit...23 Disc and card handling...24 Setup...
  • Page 9 With a DVD recorder/player...79 Playback on DVD recorder, DVD player, computer etc...79 Copying (dubbing) recordings onto a DVD recorder’s hard disk ...79 With a VCR... 80 Recording (dubbing) images onto other video devices ...80 With a printer (PictBridge)... 81 With a computer Before using with a computer...

  • Page 10: Before Using

    Before using Before using Features ∫ Easy recording! (l 42) No need to search for the recording start position. The new recording will not overwrite any previously recorded scene. ∫ Easy playback! (l 59) Recorded scenes are displayed as thumbnails. You can easily search for the scenes you want to watch.
  • Page 11 ∫ Editing scenes! (l 64, 66) You can create an original video (playlist) by collecting your favorite scenes together and then easily record (dub) this video to a VCR or a DVD recorder. If you insert a DVD-RW or a DVD-R disc recorded in this unit (that has not been finalized) into another device such as DVD recorder, computer, etc., the disc may become unusable.

  • Page 12: Quick Guide

    Before using Quick Guide ∫ Charging the battery Connect the AC cable to the AC adaptor and the AC outlet. Put the battery on the battery mount by aligning the mark, and then securely plug it in. ∫ Inserting the battery Push the battery against the battery holder and slide it until it clicks.

  • Page 13: Inserting/Removing Sd Card

    ∫ Inserting/removing an SD card Slide the card slot cover to open. Insert/remove the SD card into/from the card slot. Securely close the card slot cover. ∫ Recording motion pictures ≥ Rotate the mode dial to select Press the recording start/stop button to start recording.

  • Page 14: Motion Picture Playback

    Before using ∫ Motion picture playback ≥ Rotate the mode dial to select Select the scene to be played back. Press the joystick. Move the joystick to operate. 1/;: Playback/Pause :: Skip playback (backward) 9: Skip playback (forward) Stops the playback and shows the ∫: thumbnails.

  • Page 15: Lsqt1146

    Accessories Check the accessories before using this unit. Battery pack CGR-DU06 AC adaptor PV-DAC14D AC cable K2CA2CA00029 or K2CA2CA00025 DC cable K2GJ2DC00011 AV/S cable K2KZ9CB00001 Lens cap LSYK2004 USB cable K1HA05CD0014 CD-ROM LSFT0721 8 cm (3z) DVD-RAM disc (Single sided) LM-AF30UB Parts identification and handling...
  • Page 16 Before using 16 Joystick (l 32) 17 Recording start/stop button (l 42) 18 Disc eject lever [DISC EJECT] (l 29) 19 20 19 When recording: Zoom lever [W/T] (l 48) When playing back: Volume lever [sVOLr] (l 60) 20 Photoshot button [ ] (l 45) 21 Accessory shoe ≥...
  • Page 17 Using grip belt Adjust the belt length so it fits your hand. Adjust the belt length and the pad position. 1 Flip the belt. 2 Adjust the length. 3 Replace the belt. Attaching the lens cap Attach the lens cap to protect the surface of the lens.

  • Page 18: Lsqt1146

    Before using Tripod receptacle This is a hole for attaching the unit to the optional tripod. (Please carefully read the operating instructions for how to attach the unit to the tripod.) ≥ When the tripod is used, the card slot cover cannot be opened.

  • Page 19: Discs And Cards

    Discs and cards Discs that can be used on this unit DIsc type Recording format Characteristic Display on the screen Indication in these instructions Functions ≥ Deleting recorded scenes ≥ Editing on this unit ≥ Playback on other products ≥ Recording after finalizing DVD-RAM 8 cm (3z) Single sided/...
  • Page 20 Before using DIsc type Recording format Characteristic Display on the screen Indication in these instructions Functions ≥ Deleting recorded scenes ≥ Editing on this unit ≥ Playback on other products ≥ Recording after finalizing *1 By formatting the disc, it can be used repeatedly. (l 75) *2 DVD players and DVD recorders that support 8 cm (3z) discs.
  • Page 21 ≥ Discs inserted in a holder, cartridge, or caddy case cannot be used. Always remove bare discs from these containers prior to use. ≥ It is recommended that you use Panasonic discs. Usually discs compatible with the DVD standard can be used for recording and playback with no problems. However, some commercially available discs do not meet the DVD standard for quality and performance.
  • Page 22 Before using When using brand-new DVD-RW When using DVD-RW, select whether to record in DVD Video Recording format (VR format) or DVD- Video format (Video format) and then format the disc. (l 21, About format types) When a brand-new DVD-RW is inserted in this unit, the screen on the right appears.

  • Page 23: Cards That You Can Use With This Unit

    SD card. (l 76) ≥ We recommend that you use a Panasonic brand SD card. ≥ When the write-protect switch A on SD card is locked, no recording, deletion or editing will be possible on the card.

  • Page 24: Disc And Card Handling

    Before using Disc and card handling ∫ How to hold a disc or card Do not touch the recording/playback surface or the terminal surface. ∫ When inserting/removing a disc Do not allow the recording/playback side of the disc to get dirty and avoid fingerprints. ≥...

  • Page 25: Lsqt1146

    CHARGE lamp flashes and the charging time will be longer than normal. ≥ Battery charging time (l 26) ≥ We recommend using Panasonic batteries. (l 15, 113) ≥ If you use other batteries, we cannot guarantee the quality of this product.

  • Page 26: Charging Time And Recordable Time

    Setup Charging time and recordable time The times shown in the tables below are for when the temperature is 25 oC (77 oF) and the humidity is 60%. If the temperature is higher or lower than 25 oC (77 oF), the charging time will become longer. ∫...
  • Page 27 ∫ Recordable time (When using a DVD-RAM disc) ≥ The times indicate the recordable time when the viewfinder is used. The times in parentheses indicate the recordable time when the LCD monitor is used. ≥ The actual recordable time refers to the recordable time on a disc when repeatedly starting/stopping recording, turning the unit on/off, moving the zoom lever, etc.

  • Page 28: Lsqt1146

    Setup Connecting to the AC outlet Connect the AC cable to the AC adaptor and the AC outlet. Connect the DC cable to the AC adaptor. Connect the DC cable to this unit. ≥ Do not use the AC cable with any other equipment as it is designed only for this unit.

  • Page 29: Lsqt1146

    When the power is turned on for the first time after changing the disc or battery, the unit carries out a recognition procedure to check that there are no problems with the disc. This takes approximately 25 seconds with DVD-RAM. If you want to start using the unit as soon as you turn on the power, do the following.
  • Page 30 Setup A few moments after the ACCESS/PC lamp blinks, the cover of the disc compartment will open slightly. Open the cover of the disc compartment by hand and insert/ remove the disc. ∫ Inserting disc Fit the disc onto the spindle in the center and then push the disc down until it clicks into place.

  • Page 31: Lsqt1146

    “SIDE B” recording/playback side is the side with the “SIDE A” mark. A “SIDE A” mark B The opposite side is the “SIDE A” recording/ playback side. ≥ Do not use excessive force when opening the cover. ≥ Do not touch the pickup lens or the recording/ playback side of the disc.

  • Page 32: Selecting A Mode

    Setup Insert/remove the SD card into/ from the card slot. ≥ When inserting an SD card, face the label side A upwards and press it straight in as far as it goes. ≥ When removing the SD card, press the center of the SD card and then pull it straight out.

  • Page 33: Operations During Playback

    Move the joystick up, down, left, or right to select an item or scene, and then press the joystick to set it. 1 Select by moving up. 2 Select by moving down. 3 Select by moving left. 4 Select by moving right. 5 Press the joystick to select the item.
  • Page 34 Setup About the operation icons displayed in each mode About auto mode and manual mode (l 41) Video recording mode 1/2 1/2 NEXT 1/2 NEXT NEXT 2/2 NEXT 2/2 2/2 NEXT NEXT Icon (1/2) (2/2) In manual mode (3/3) In manual focus mode (4/4) ≥...
  • Page 35 Picture recording mode 1/2 NEXT 1/2 1/2 NEXT NEXT 2/2 2/2 NEXT 2/2 NEXT NEXT Icon Direction Ø (1/2) (2/2) In manual mode (3/3) In manual focus mode (4/4) Picture playback mode Icon Direction Slide show start/pause Stop playback and show thumbnails ∫...

  • Page 36: Help Mode

    Setup ∫ Help mode The help mode explains the operation icons that are displayed when the AUTO/MANUAL/FOCUS switch is set to AUTO in video/picture recording mode. ¬ Rotate the mode dial to select Press the joystick to display the icon during the recording pause. 1/2 NEXT 1/2 1/2 NEXT Move the joystick right to select...
  • Page 37 Move the joystick up or down in order to select the desired top menu. Move the joystick right or press the joystick. Move the joystick up or down in order to select the submenu item. Move the joystick right or press the joystick.

  • Page 38: Setting Date And Time

    Setup Setting date and time When the unit is turned on for the first time, a message asking you to set the date and time will appear. ≥ Select [YES] and press the joystick. Perform steps 2 and 3 below to set the date and time. If the screen shows the incorrect date and time, then adjust it.

  • Page 39: Adjusting Lcd Monitor/Viewfinder

    Adjusting LCD monitor/ viewfinder Adjusting the brightness and color level Press the MENU button, then select [SETUP] # [LCD SET] or [EVF SET] # [YES] and press the joystick. Move the joystick up or down to select the item to be adjusted. Then, move the joystick left or right to make the adjustment.

  • Page 40: Lsqt1146

    Recording Recording Before recording Basic camera positioning 1 Hold the camera with both hands. 2 Put your hand through the grip belt. 3 Do not cover the microphones or sensors with your hands. 4 Keep your arms near your body. 5 Slightly open your legs.
  • Page 41 ∫ About auto mode Set the AUTO/MANUAL/FOCUS switch to AUTO, and color balance (white balance) and focusing will be adjusted automatically. jAuto white balance (l 108) jAuto focusing (l 109) Depending on the brightness of the subject etc., the aperture and shutter speed are automatically adjusted for an optimum brightness.

  • Page 42: Lsqt1146

    Recording Recording motion pictures Record motion pictures onto a disc. ≥ When the unit is purchased, the aspect ratio is set to [16:9] for recording images compatible with a wide-screen TV. To watch images on a regular TV (4:3), change the aspect ratio setting (l 53) before recording the images or when watching them on the connected TV (l 78).

  • Page 43: Lsqt1146

    ≥ When about 5 minutes have passed without any operation in recording pause, the unit automatically turns off to prevent the battery from running down. When you want to use the unit, turn it on again. This setting can also be set to [OFF]. (l 92, [POWER SAVE]) Screen indications in the video recording mode A Recording mode B Remaining time left for recording...
  • Page 44 Recording ∫ Approximate recordable time for 1 disc (single sided) Disc type DVD-RAM DVD-R DL ≥ This unit records in VBR. VBR is an abbreviation for Variable Bit Rate. VBR recording automatically varies the bit rate (amount of data in a fixed time) depending on the subject being recorded. This means if a subject with sharp movements is recorded, the recording time is reduced.

  • Page 45: Recording Still Pictures (Jpeg Still Pictures)

    Recording still pictures (JPEG still pictures) Record the still picture on an SD card. ≥ When this unit is purchased, [PICTURE SIZE] is set to [ wide-screen TV (16:9). To record pictures with a 4:3 aspect ratio, change the [PICTURE SIZE] setting before recording (l 46).

  • Page 46: Lsqt1146

    Recording ∫ To record still pictures clearly ≥ When zooming in on the subject with a magnification of 4k or higher, it is difficult to reduce the slight shaking from holding this unit by hand. We recommend decreasing the zoom magnification and approaching the subject when recording.
  • Page 47 Recording ≥ When this unit is purchased, [PICTURE SIZE] is set to [ ]. The sides of pictures recorded with a 16:9 aspect ratio may be cut at printing. Check before printing. ∫ [PICT.QUALITY] Selecting the picture quality. Press the MENU button, then select [BASIC] # [PICT.QUALITY] # desired item and press the joystick.

  • Page 48: Lsqt1146

    Recording Various recording functions Zoom in/out function (RAM) (-RW‹VR›) (-RW‹V›) (-R) (SD) You can zoom in up to 32k optically. ¬ Rotate the mode dial to select Move the zoom lever. T side: Close-up recording (zoom in) W side: Wide-angle recording (zoom out) ≥...

  • Page 49: Lsqt1146

    Press the MENU button, then select [ADVANCED] # [ZOOM MIC] # [ON] and press the joystick. Recording yourself (RAM) (-RW‹VR›) (-RW‹V›) (-R) (SD) You can record yourself while viewing the LCD monitor. You can record persons in front of the unit while showing them the image.

  • Page 50: Lsqt1146

    Recording ≥ If the video light is used with a conversion lens attached, a slight vignetting (darkening around edges) effect occurs on the screen. ≥ Using the MagicPix function at the same time will make conditions even brighter. ≥ The video light enables brightening of the images taken in a dimly-lit place.

  • Page 51: Lsqt1146

    When you start recording, the image/audio gradually appears. Pause recording. (Fade out) The image/audio gradually disappears. After the image/audio completely disappears, recording stops. ≥ After recording, the fade setting is canceled. To cancel fading Select [ ] again. To select the color for fade in/out The color which appears in fading pictures can be selected.

  • Page 52: Self-Timer Recording

    Recording Press the joystick. Then move the joystick down to display the icon shown in the illustration. Move the joystick up to select ≥ If it is difficult to focus, adjust the focus manually. (l 55) To cancel the MagicPix function Select [ ] again.

  • Page 53: Wide Mode

    Press the MENU button, then select [BASIC] # [GUIDE LINES] # [ON] and press the joystick. To cancel the Recording guideline function Press the MENU button, then select [BASIC] # [GUIDE LINES] # [OFF] and press the joystick. ≥ The guidelines do not appear on the images actually recorded.

  • Page 54: Wind Noise Reduction Function

    Recording Wind noise reduction function This is for reducing the wind noise coming into the microphone when recording. (RAM) (-RW‹VR›) (-RW‹V›) (-R) ¬ Rotate the mode dial to select Press the MENU button, then select [ADVANCED] # [WIND CUT] # [ON] and press the joystick.

  • Page 55: Manual Focus Adjustment

    Sports mode ≥ For slow-motion playback or playback pause of recorded pictures, this mode helps diminish camera shake. ≥ During normal playback, the image movement may not look smooth. ≥ Avoid recording under fluorescent light, mercury light or sodium light because the color and brightness of the playback image may change.

  • Page 56: White Balance

    Recording White balance This is for recording in natural colors. (RAM) (-RW‹VR›) (-RW‹V›) (-R) (SD) The automatic white balance function may not reproduce natural colors depending on the scenes or lighting conditions. If so, you can adjust the white balance manually. ¬...

  • Page 57: Manual Shutter Speed/ Aperture Adjustment

    ∫ About the white balance sensor A The white balance sensor detects the type of light source during recording. Do not cover the white balance sensor during recording, or it may not function properly. ≥ When the unit is turned on with the lens cap attached, the automatic white balance adjustment may not function properly.
  • Page 58 Recording ≥ If you increase the shutter speed manually, the gain value will increase automatically depending on how much the sensitivity lowers and the noise on the screen may increase. ≥ You may see vertical lines of light in the playback image of a brightly shining subject or highly reflective subject, but this is not a malfunction.

  • Page 59: Playback

    Playback Motion picture playback Play back the motion pictures recorded on the disc. Rotate the mode dial to select The motion pictures recorded on the disc are displayed as thumbnails. Select the scene to be played back. A Scene number B Scroll bar display The selected scene will be encircled by a yellow frame.

  • Page 60: Slow Motion Playback

    Playback ≥ The time displayed may be different from the recording time and it may take time to display the thumbnail display when playing back motion pictures recorded on another product. ≥ The recording time is not displayed on the screen during playback of scenes recorded on other products.

  • Page 61: Playing Back Motion Pictures By Date

    Playing back motion pictures by date Recorded scenes are grouped by date on this unit. Scenes recorded on the same day can be played back in succession. Press the MENU button, then select [PLAY SETUP] # [PLAY MODE] # [BY DATE] and press the joystick. ≥...

  • Page 62: Still Picture Playback (Jpeg Still Pictures)

    Playback Still picture playback (JPEG still pictures) Play back the still pictures recorded on the card. Rotate the mode dial to select The still pictures recorded on the SD card are displayed as thumbnails. Select the file to be played back. A File number B Scroll bar display The selected file will be encircled by a yellow frame.
  • Page 63 ≥ It takes time to display the file depending on the number of pixels of the file. ≥ When a file is displayed as [ ≥ If you attempt to play back file recorded in a different format or file data is defective, an error message may appear.

  • Page 64: Editing

    Editing Editing Editing scenes Deleting scenes This is for deleting scenes recorded on discs. The deleted scenes cannot be restored. ≥ Scenes on DVD-RW (Video format) and DVD- R cannot be deleted. Deleting scenes one at a time ¬ Rotate the mode dial to select Press the button during playback.

  • Page 65: Dividing A Scene

    ≥ Do not turn off this unit while deleting. ≥ When you delete scenes, use a battery with sufficient battery power or use the AC adaptor. ≥ It may not be possible to delete scenes that have been divided. Combine the divided scenes, and then delete them.

  • Page 66: Using Playlists

    Editing Select the scene to be combined, then press the joystick. ≥ The selected scene and the next scene are combined. ≥ If you wish to combine scenes that are not next to each other or scenes with different recording dates, first create a playlist and then combine the scenes on the playlist.

  • Page 67: Playing Back A Playlist

    Select the scene to be added to the playlist, then press the joystick. The selected scene is encircled by a red frame. ≥ When the joystick is pressed again, the selected scene will be canceled. ≥ Up to 50 scenes can be set in succession. ≥...

  • Page 68: Deleting Scenes

    Editing Deleting scenes ≥ Deleting scenes on a playlist will not affect the original scenes. ∫ Deleting scenes one at a time ¬ Select playlist playback mode. (l 67, steps 1 and 2) Press the button during playback. When the confirmation message appears, select [YES], then press the joystick.

  • Page 69: Dividing A Scene

    Press the MENU button, then select [EDIT] # [ADD] # [YES] and press the joystick. Select the scene to be added, then press the joystick. The selected scene is encircled by a red frame. ≥ When the joystick is pressed again, the selected scene will be canceled.
  • Page 70 Editing Press the MENU button, then select [EDIT] # [DIVIDE] # [YES] and press the joystick. Select the scene to be divided, then press the joystick. The selected scene is played back. When you reach the area where you want to divide the scene, move the joystick down to set the dividing point.

  • Page 71: Editing Still Pictures

    Editing still pictures Deleting still pictures This is for deleting still picture files recorded on SD cards. The deleted files cannot be restored. Deleting files one at a time ¬ Rotate the mode dial to select Press the button during playback.

  • Page 72: Locking Still Pictures

    Editing ≥ If files conforming to DCF standard are deleted, all the data related to the files will be deleted. Locking still pictures This is for preventing still picture files from being deleted by mistake. Still picture files recorded on an SD card can be locked so that they are not deleted by mistake.
  • Page 73 To cancel all DPOF settings Press the MENU button, then select [PICT. SETUP] # [DPOF SET] # [CANCEL ALL] and press the joystick. ≥ When the confirmation message appears, select [YES], then press the joystick. ∫ What is DPOF? DPOF stands for Digital Print Order Format. This enables picture printing information to be written onto an SD card so that it can be used on a system supporting DPOF.

  • Page 74: Disc And Card Management

    Disc and card management Disc and card management Disc management Finalizing a disc It allows the discs to be played on other devices. (-RW‹VR›) (-RW‹V›) (-R) If you insert a DVD-RW or a DVD-R disc recorded in this unit (that has not been finalized) into another device such as DVD recorder, computer, etc., the disc may become unusable.

  • Page 75: Un-Finalizing A Dvd-Rw

    Un-finalizing a DVD-RW This is for un-finalizing a DVD-RW (Video format) so that it can be used for recording. ¬ Rotate the mode dial to select Press the MENU button, then select [DISC SETUP] # [UN-FINALIZE] # [YES] and press the joystick. When the confirmation message appears, select [YES], then press the joystick.

  • Page 76: Displaying Disc Information

    Disc and card management ≥ When formatting a DVD-RAM, skip to step 3. (When formatting a DVD-RW only) Select format type (l 21), then press the joystick. When the confirmation message appears, select [YES], then press the joystick. ≥ When formatting is complete, press the MENU button to exit the message screen.
  • Page 77 ≥ Use this unit to format SD cards. If an SD card is formatted on other products (such as a computer), the time spent for recording may become longer and you may not be able to use the SD card. ≥...

  • Page 78: With Other Products

    With other products With a TV With other products Playback on TV (RAM) (-RW‹VR›) (-RW‹V›) (-R) (SD) The motion pictures and still pictures recorded by this unit can be played back on a TV. ≥ Use the AC adaptor to free you from worrying about the battery running down.

  • Page 79: With A Dvd Recorder/Player

    With a DVD recorder/ player Playback on DVD recorder, DVD player, computer etc. ≥ Do not insert a DVD-RW or a DVD-R disc recorded in this unit (that has not been finalized) into another device such as DVD recorder, DVD player, computer, etc. as the disc may become unusable.

  • Page 80: With A Vcr

    With other products [Only when you record (dub) a DVD-RW or a DVD-R] Finalize the disc on the unit. (l 74) Insert the disc in the DVD recorder, then copy (dub) the contents onto the hard disk. ≥ For details on how to copy (dub) the images onto the hard disk, refer to the operating instructions of the DVD recorder.

  • Page 81: With A Printer (Pictbridge)

    To stop recording (dubbing) Stop recording on the connected device. Then stop playback on this unit. With a printer (PictBridge) To print pictures by directly connecting this unit to the printer, use a printer compatible with PictBridge. (Read the operating instructions for the printer.) ≥...
  • Page 82 With other products [A4]: A4 size ≥ You cannot set paper sizes not supported on the printer. Select the layout setting on [PAGE LAYOUT]. [STANDARD]: Layout specific to the printer No frame print Frame print ≥ You cannot set page layouts not supported on the printer.

  • Page 83: With A Computer

    Before using with a computer With a computer Contents on provided CD-ROM The following software applications are contained on the provided CD-ROM. ∫ DVD-RAM Driver This is necessary to configure the unit as a drive on a computer. DVDForm: This is used to format DVD-RAM on a computer. ∫...

  • Page 84: End User License Agreement

    With a computer End User License Agreement Before opening the CD-ROM package, please read the following. You (“Licensee”) are granted a license for the Software defined in this End User Software Agreement (“Agreement”) on condition that you agree to the terms and conditions of this Agreement.

  • Page 85: Installing Dvd-Ram Driver

    ≥ Before starting the installation, close any other software applications which are running. ≥ Do not perform any other operations on your computer while the software is being installed. ≥ If another DVD-RAM Driver is already installed in your computer, check this DVD-RAM Driver. If packet writing software which supports DVD- RAM discs is installed, it is necessary to uninstall it and then install the provided...

  • Page 86: Reading The Operating Instructions Of The Software Applications

    With a computer Click [Finish]. Windows 2000 only: The detection of device will start, after which it will take several minutes for the computer to detect the device. When detecting the device is complete, a message that prompts you to reboot will appear: Click [Yes].

  • Page 87: Connection And Recognition

    Connection and recognition Connection and recognition procedures After the driver and software applications are installed, the unit must be connected to the computer and be correctly recognized by the computer. ≥ Connect after installing the driver and software applications. ≥ If the supplied CD-ROM is inserted in the computer, remove it.

  • Page 88: About The Computer Display

    With a computer ≥ The disc and card cannot be accessed simultaneously. ≥ It may be necessary to reboot the computer after connecting this unit to it for the first time. About the computer display When the unit is connected to a computer, it is recognized as an external drive.

  • Page 89: To Disconnect Usb Cable Safely

    To disconnect USB cable safely Double click the tray. Hardware disconnect dialog appears. ≥ Depending on your computer’s settings, this icon may not be displayed. Select [USB Mass Storage Device] and click [Stop]. Verify [MATSHITA DVD-RAM LMXK1987 USB Device] or [MATSHITA DVD Cam USB Device] is selected and click [OK].
  • Page 90 With a computer When using a card: [USB Mass Storage Device] is displayed at [Universal Serial Bus controllers]. ∫ If the driver has not been recognized properly [!] or [Unknown device] appears at [Universal Serial Bus controllers] or [Other devices], etc. (Where the display will appear depends on the type of computer you are using.) You can use the following method to enable it to...

  • Page 91: Others

    Others Menus Menu list Motion picture recording menus ∫ [BASIC] [SCENE MODE] (l 54) [GUIDE LINES] (l 52) [REC MODE] (l 43) [ASPECT] (l 53) [CLOCK SET] (l 38) ∫ [ADVANCED] [D.ZOOM] (l 48) [O.I.S.] (l 53) [FADE COLOR] (l 51) [WIND CUT] (l 54) [ZOOM MIC] (l 48) ∫...

  • Page 92: Other Menus

    Others ∫ [DISC SETUP] [FINALIZE] (l 74) [UN-FINALIZE] (l 75) [DISC PROTECT] (l 75) [FORMAT DISC] (l 75) [INFORMATION] (l 76) ∫ [SETUP] [DISPLAY] (l 92) [DATE/TIME] (l 38) [DATE FORMAT] (l 38) [POWER SAVE] (l 92) [BEEP SOUND] (l 92) [LCD SET] (l 39) [EVF SET] (l 39) [TV ASPECT] (l 78)

  • Page 93: Indications

    When this unit is recognized by the computer or the printer, etc. 2 Beeps When you pause recording When you turn off the power 2 Beeps for 4 times When an error occurs e.g. recording not starting. Check the sentence displayed on the screen. (l 96) ∫...

  • Page 94: Playback Indications

    Others Wind noise reduction Motion picture recording mode Sports mode Portrait mode Low light mode Spotlight mode Surf & snow mode Auto white balance Indoor mode (recording under incandescent lamp) Outdoor mode Manual adjustment mode Disc type DVD-RAM DVD-RW (VR format) DVD-RW (Video format) DVD-RW (unformatted) DVD-R...
  • Page 95 Locked still pictures Number of recording pixels for still pictures 640k480 640k360 The picture size is not displayed for still pictures recorded with other products that have different picture sizes from the sizes shown above. ∫ Confirmatory indications –– (Time The built-in battery is low.

  • Page 96: Messages

    You inserted a disc that does not meet the DVD standard for quality and performance so you may not be able to record normally. Refer to the following support site for information about discs that have been confirmed as compatible by Panasonic. http://panasonic.co.jp/pavc/global/cs/e_cam (This website is in English only.) A finalized DVD-RW (Video format) or DVD-R has been inserted.

  • Page 97: About Recovery

    CARD FULL. PUSH THE RESET SWITCH. CHECK THE DISC AFTER PUSHING THE RESET SWITCH TO REPAIR THE DATA. CHANGE TO MANUAL MODE. CANCEL MAGICPIX MODE. TURN OFF THE VIDEO LIGHT. CANNOT SET. PLEASE CONNECT AC ADAPTOR DISCONNECT USB CABLE. CANNOT OPERATE WHILE CONNECTED TO COMPUTER.

  • Page 98: Functions That Cannot Be Used Simultaneously

    Others Functions that cannot be used simultaneously Some functions in this unit are disabled or cannot be selected due to the unit’s specifications. The table below shows examples of functions restricted by various conditions. Functions Digital zoom Fade MagicPix Backlight compensation Soft skin mode (Set and cancel) Help mode Video light on (gain up mode)

  • Page 99: Frequently Asked Questions

    Frequently asked questions What kind of discs can be used? DVD-RAM, DVD-RW, DVD-R and DVD-R DL can be used if they are 8 cm (3z) non-cartridge discs. (l 19) Can discs with a cartridge be used? They can be used if the cartridge is removed. Can double sided discs be used? They can be used.

  • Page 100: Troubleshooting

    Others Troubleshooting Problem This unit cannot be turned on. This unit is turned off automatically. This unit does not stay on long enough. A clicking sound is heard when the power is turned off. Battery runs down quickly. This unit cannot be operated though it is turned on.
  • Page 101 Problem The DISC EJECT lever does not work. The disc cannot be read. A function indication such as the remaining time indication or the elapsed time indication is not shown. Recording does not start although power is supplied to this unit and the disc or card is correctly inserted.
  • Page 102 Others Problem Auto focus function does not work. Sound is not played back from the built-in speaker of this unit. Although this unit is correctly connected to a TV, playback images cannot be seen. The playback images are squeezed horizontally. Scenes cannot be deleted or edited.
  • Page 103 Problem The indication disappears. The screen is frozen. No operation can be performed. “PUSH THE RESET SWITCH.” or “CHECK THE DISC AFTER PUSHING THE RESET SWITCH TO REPAIR THE DATA.” is displayed. If the SD card is inserted in another device, it is not recognized.
  • Page 104 Others Problem The DISC EJECT lever does not work when the unit is connected to the computer. Cannot write to DVD- RAM. Cannot format a disc with the DVD-RAM Driver. When the USB cable is disconnected, an error message will appear on the computer.

  • Page 105: Cautions For Use

    Cautions for use About this unit ≥ The unit, disc and card become warm after long operation, but this is not a malfunction. Keep the DVD Video Camera as far away as possible from electromagnetic equipment (such as microwave ovens, TVs, video games etc.).

  • Page 106: About The Ac Adaptor

    Others ≥ This unit is not intended for industrial use. When you are not going to use the unit for an extended time ≥ When storing the unit in a cupboard or cabinet, it is recommended that you place a desiccant (silica gel) in with it.

  • Page 107: About The Disc

    About the disc ≥ If there is dust, a scratch, or dirt on disc or if it is warped, the following phenomena may occur: jBlock noise in playback image jMomentary stop of playback image jSound interrupted during playback, or abnormal sound jScenes are displayed as [ thumbnail display jDisc cannot correctly be recognized...

  • Page 108: About Condensation

    Others About condensation When condensation forms on the unit, the lens will cloud up and the unit may not work properly. Make every effort to ensure that condensation does not form. If it does form, take the actions described below. Causes of condensation Condensation takes place when the ambient temperature or humidity is changed as...

  • Page 109: Auto Focus

    source. For light outside the functional automatic white balance adjustment range, use the manual white balance adjustment mode. White balance The images recorded by the unit may become bluish or reddish under the influence of certain light sources. To avoid such phenomena, adjust the white balance.

  • Page 110: Specifications

    Others Specifications DVD Video Camera Information for your safety Power source: Power consumption: Signal system Recording format Image sensor Lens Filter diameter Zoom Monitor Viewfinder Microphone Speaker Standard illumination Minimum required illumination Video output level S Video output level Audio output level (Line) Dimensions (excluding the projecting parts)
  • Page 111 Operating temperature Operating humidity Motion pictures Recording media Compression Recording mode and transfer rate Audio compression Still pictures Recording media Compression Picture size AC adaptor Information for your safety Power source: Power consumption: DC output: Dimensions Mass Specifications may change without prior notice. 0 °C to 40 °C (32 °F to 104 °F) (0 °C to 30 °C (32 °F to 86 °F) when connected to the computer) 10% to 80%...

  • Page 112: Number Of Recordable Pictures On An Sd Card

    Others Number of recordable pictures on an SD card Picture size Picture quality 8 MB 16 MB 32 MB 64 MB 128 MB 256 MB 512 MB 1 GB 2 GB 4 GB ≥ The number of recordable pictures depends on whether [ subject being recorded.

  • Page 113: Optional Accessories

    Optional accessories Some optional accessories may not be available in some countries. Accessory No. LM-AF30U LM-AF60U LM-RW30U LM-RW60U LM-RF30V LM-RF60V LM-RF55LV PV-DAC14 CGR-DU06A/1B* CGA-DU12A/1B* CGA-DU21A/1B* RP-SDR04GU1K RP-SDR02GU1A RP-SDR01GU1A RP-SDR512U1A RP-SDR256U1A RP-SDK02GU1A RP-SDH01GU1A RP-SDK512U1A RP-SDH256U1A RP-SDV04GU1K RP-SDV02GU1A RP-SDV01GU1A RP-SS01GU1K RP-SS512BU1K RP-SS256BU1K VW-LDC10 * Please refer to page 26 concerning the battery charging time and available recording time.

  • Page 114: Accessory Order Form (For Usa Customers)

    CALL PANASONIC’S ACCESSORY ORDER LINE AT 1-800-332-5368 MAIL THIS ORDER TO: PANASONIC SERVICES COMPANY ACCESSORY ORDER OFFICE 20421 84th Avenue South Kent, WA. 98032 In CANADA, please contact your local Panasonic dealer for more information on Accessories. LSQT1146 P rice Each Quantity Your State &...

  • Page 115: Request For Service Notice (Usa Only)

    Request for Service Notice: Mail this completed form and your Proof of Purchase along with your unit to: Panasonic Camera and Digital Service Center • Please include your proof of purchase. (Failure to do so will delay your repair.) •...

  • Page 116: Limited Warranty (For Usa Customers)

    If your product does not work properly because of a defect in materials or workmanship, Panasonic Consumer Electronics Company or Panasonic Puerto Rico, Inc. (collectively referred to as “the warrantor”) will, for the length of the period indicated on the chart below, which starts with the date of original purchase (“warranty period”), at its option either (a) repair your product with new or refurbished...

  • Page 117: Customer Services Directory

    1-800-211-PANA (7262), Monday-Friday 9 am-9 pm; Saturday-Sunday 10 am-7 pm, EST For hearing or speech impaired TTY users, TTY : 1-877-833-8855 Purchase Parts, Accessories and Instruction Books online for all Panasonic Products by visiting our Web Site at: http://www.pasc.panasonic.com or, send your request by E-mail to: npcparts@us.panasonic.com...

  • Page 118: (For Canadian Customers)

    5770 Ambler Drive, Mississauga, Ontario L4W 2T3 PANASONIC PRODUCT – LIMITED WARRANTY Panasonic Canada Inc. warrants this product to be free from defects in material and workmanship and agrees to remedy any such defect for a period as stated below from the date of original purchase.

  • Page 119: Index

    Others Index ∫ A AC adaptor ....25, 28, 106 Aperture ......57 Auto focus .
  • Page 120 Others Volume adjustment ....60 VR format ......21 ∫...

  • Page 121: Spanish Quick Use Guide/Guía Española Para El Uso Rápido

    Others Spanish Quick Use Guide/ Guía española para el uso rápido ∫ Carga de la batería Conecte el cable eléctrico de CA al adaptador de CA y a la toma de la red de Meta la batería en el respectivo soporte alineando la marca, luego encájela.
  • Page 122 Others ∫ Cómo insertar/quitar una tarjeta Deslice la tapa de la ranura para tarjetas para abrirla. Inserte/quite la tarjeta SD en/de la ranura de la tarjeta. Cierre firmemente la tapa de la ranura de la tarjeta. ∫ Grabación de imágenes dinámicas ≥...
  • Page 123 ∫ Reproducción de imágenes dinámicas ≥ Gire el selector de modo para seleccionar Seleccione la escena a ser reproducida. Pulse el joystick. Mueva el joystick para obrar. 1/;: Reproducción/Pausa :: Salto de reproducción (hacia atrás) 9: Salto de reproducción (en adelante) Detiene la reproducción y muestra las ∫: miniaturas.
  • Page 124 Panasonic Consumer Electronics Company, Division of Panasonic Corporation of North America One Panasonic Way, Secaucus, NJ 07094 Panasonic Puerto Rico, Inc. Ave. 65 de Infantería, Km. 9.5, San Gabriel Industrial Park, Carolina, Puerto Rico 00985 Panasonic Canada Inc. 5770 Ambler Drive, Mississauga, Ontario, L4W 2T3...

This manual is also suitable for:

Vdrd220p - dvd palmcorder camcorderDvd palmcorder camcorder vdr-d220

Table of Contents

Save PDF