Allen-Bradley PV300 Micro User Manual page 97

4. If necessary, press Erase/Format Card, [F4] key on keypad
terminals, to format or erase a 2711-NM11, -12, -13, -14, -15
memory card.
Do not perform this operation on a
IMPORTANT
2711-NM2xx ATA card (where xx is size
in megabytes). The card becomes
inoperable.
Because this operation erases all data on the memory card, you
are prompted to abort or continue.
Format erases entire card?
F1 - Abort
F2 - Continue
5. Press Save to Card, [F3] on keypad terminals, to transfer the
application in the terminal to the card.
If the application already exists on the memory card, you are
prompted to abort or continue.
The .PVA file exits:
F1 - Abort
F2 - Upload with new PVA file
The terminal displays the status of the transfer.
In progress . . .
6. When the transfer is complete, the application file name appears
in the Applications on Card list. Press Memory Card Listing, [F1]
key on keypad terminals, to scroll through the list.
Note: If you upload a file that exists on the memory card, the
uploaded file name is altered with a sequential digit as a suffix.
For example, Control.pva becomes Control0.pva.
For files with eight character names, a digit overwrites the last
character. For example, Motorcon.pva becomes Motorco0.pva.
Using a Memory Card 4-7
Publication 2711-UM014B-EN-P