Toro ECXTRA Manual page 4

Manually turning on Selected Zones:
1. Turn the dial to the Run Position.
2. Press the manual button once.
3. Press the plus to select the flashing zone or press the minus to skip the Zone.
4. Once you have selected the zones you want to run...
5. Press the manual button once more to begin the watering.
Clearing the Program Memory:
1. Turn the dial to season adjust.
2. Check the program switch setting to make sure it is the desired program you want
to clear.
3. Press next and CL will flash.
4. Press and hold the minus button until CL stops flashing. (Apporx. 5 seconds)
5. To clear the memory of another program, repeat steps 2-4.
6. Return to dial to the run position once the memory is clear.
Where to update the software:
1. http://software.ecxtra.com/setup.exe
How to Reset the Time Pod:
1. On the back of the time pod at the top right corner, there is a small hole and you
would unravel a paper clip and push it in the hole to reset the time pod.
What software works with the ECXTRA?
• ME2000
• Windows XP Home
• Widows NT
• Windows 98 (Second Edition)
What Software does not work with the ECXTRA?
• Windows XP Pro
• Macintosh
• Windows 98
Information on the Time Pod
- 4 -