Toro ECXTRA Manual page 3

Checking the Day Exclusion Feature:
1. Turn the dial to watering days.
2. Press next until "DE" is on the display.
3. If all the days of the week are displayed then the days are on but if none of the
days is displayed then you need to...
4. Press the plus button to turn the days on.
Setting the Start Times:
1. Turn the dial to Start Time.
2. Start time number 1 will flash.
3. Press next and the hour or "Off" will flash.
4. Press the plus or minus to set the desired hour.
5. Press next and the minutes will flash, and then press the plus or the minus to the
desired minutes.
Note: This timer can be programmed to water up to 4 times a day.
Turning off a Start Time:
1. To turn off a start time, press the plus or at the same time.
Setting the Zone Run Times:
1. Turn the dial to zone run times.
2. Zone number 1 will flash.
3. Press next and the run time or off will flash
4. Press the plus or the minus button to set the desired run time.
5. Press next to move on to the next zone and repeat steps 3 & 4.
6. When finished programming the zone run times turn the dial back to the Run
position.
Note: To turn the run times to off press the plus or minus buttons at the same time.
Manually turning on a Program:
1. Turn the dial to the Run position.
2. Position the program switch to the desired program you want to start.
3. Press the manual start button 2 times to start the program.
Manual Operation
- 3 -