Siemens SIPROTEC 5 Manual page 168

Function-Group Types
6.4 Function-Group Type Phasor Measurement Unit (PMU)
[scdevpmu-210415, 1, en_US]
Figure 6-28
You can also change the communication settings in the same way. To do this, select the corresponding
communication port in the Communication menu on the device display. From the Channel 1 menu item, you
can then access the detailed setting options for the IP or PMU communication settings (see
[sccompmu, 1, en_US]
Figure 6-29
168
Changing the PMU Setting Values via the Device Display
Changing the Communication Setting Values Via the Device Display
Figure 6-29).
SIPROTEC 5, Fault Recorder, Manual
C53000-G5040-C018-5, Edition 11.2017