Canon ColorPASS-Z5000 Color Manual page 88

3
3-30 Color Calibration
5. Under Generate Measurement Page, click Print.
6. In the Print Options dialog box that appears, choose the Page Type, Paper Size, and
Input Tray to use for the measurement page and click Print.
For AutoCal2, the Page Type pop-up menu states AutoCal Page. For the densitometer
method, select either 34 or 21 Sorted Patches.
In the Input Tray pop-up menu, specify the paper source.
If you print a measurement page from the Stack Bypass Tray, you must select SB
N :
OTE
(Stack Bypass) or SB-Size Set at Copier in the Input Tray pop-up menu. Choose SB-
Size Set at Copier if you specify SB-Size Set at Copier as the Paper Source option in the
printer driver, and then load the appropriate paper in the Manual Feed tray and select
the correct paper size from the copier touch panel display.
7. Retrieve the Measurement Page and click Cancel.
8. Under Get Measurements, click Measure.
9. If you chose the AutoCal2 method, follow the directions in the dialog box that appears
for placing the Gray Scale strip and measurement page on the copier glass.