Canon ColorPASS-Z5000 Color Manual page 75

3
3-17 Calibrating with ColorWise Pro Tools and DTP41
2. Click Calibrator.
3. Select DTP41 as the measurement method.
X-Rite DTP41 should appear as a measurement method. This information is provided
to Calibrator by the ColorPASS. If this option does not appear, make sure you are
connected to the ColorPASS.
4. Under Check Print Settings, choose the desired calibration set.
Choose the appropriate calibration set for the type of media you will use most often.
For this calibration to take effect, the calibration set must be associated with one
N :
OTE
or more output profiles. The default calibration set is already associated with the
default output profile, so there is no need to make any new associations.