3
3-29 Calibrating with ColorWise Pro Tools
2. Click Calibrator.
3. Select a measurement method.
AutoCal2 and X-Rite DTP32 should appear as the measurement methods. This
information is provided to Calibrator by the ColorPASS. If neither option appears,
make sure you are connected to the ColorPASS.
4. Under Check Print Settings, choose the desired calibration set.
If there is more than one option, choose the appropriate calibration set for the type of
media you will use most often.
For this calibration to take effect, the calibration set must be associated with one
N
:
OTE
or more output profiles. The default calibration set is already associated with the
default output profile, so there is no need to make any new associations.