Advertisement
2. 选择执行器（灯图标）
3. 显示蓝色连接线，该线用于显示设备之
间的连接 -> 将配置传输至设备并勾
选确认。
提示：已预先编程传感器/执行器单
元。因此，已预先建立翘板开关和位于
其下方的执行器之间的连接（参见虚线
连接）。
2. Select actuator (light icon)
3. A blue connecting line appears to
indicate the link between the devices
-> Transmit the configuration to the
devices
Note: Sensor/actuator units are pre-
programmed. Which means that the
link between the rocker and actuator
below it has already been allocated
(see dotted link).
free@home | 19
Advertisement
