Software Update; Installing New Software - Teufel Cinebar Duett Technical Description And User Manual

Software Update

The software of the Cinebar Duett is
being continually developed. You can
download subsequent versions from
our website
www.teufelaudio.com/support/.

Installing new software

Load the new software from our
website.
1. Unpack the downloaded file and
save it to a USB stick (FAT32
format).
2. Disconnect the mains plug of the
mains adapter Cinebar Duett from
the socket.
NOTICE
Risk of damage!
– The Cinebar Duett must
not be turned off while the
following steps are being
performed!
3. Insert the USB stick in the SERVICE
jack (10).
4. Connect the mains adapter with
the socket again. "START UPG" will
appear in the text field (13) and the
update will run in multiple phases.
Finally, the message "UPG OK" will
appear and the Cinebar Duett will
switch to standby mode.
5. Disconnect the mains plug of the
mains adapter Cinebar Duett from
the socket again.
6. Pull the USB stick out of the
SERVICE jack (10).
7. Connect the mains adapter with
the socket again.
The new software is now installed.
(13)
START UPG
(10)
• Cinebar Duett 23