Related Manuals for Teufel Cinebar LUX
Summary of Contents for Teufel Cinebar LUX
- Page 1 Technical Description And User Manual Cinebar LUX 2.1 Soundbar with wireless technology...
-
Page 2: Table Of Contents
HDMI source .......18 Connection to the Internet ..32 Optical-digital source ....18 Care And Cleaning .......33 Analogue source ......19 Subwoofer ........19 Troubleshooting ......34 Network ........19 Technical Data ......37 USB ..........19 Declaration Of Conformity ..37 Rear speakers ......20 Power supply .......20 • Cinebar LUX... -
Page 3: General Notes And Information
Bluetooth symbol are registered trademarks of Bluetooth SIG, Inc. Original packaging and any use by Lautsprecher Teufel is licensed. If you wish to exercise your eight- week right of return, we ask that you be absolutely sure to hold onto The Spotify software is subject to the packaging. -
Page 4: Complaints
Lautsprecher Teufel GmbH BIKINI Berlin Budapester Str. 44 10787 Berlin (Germany) Telephone: 00800 200 300 40 (toll- free) Fax: +49 (0)30 / 300 930 930 Online support: www.teufelaudio.com/service Contact form: www.teufelaudio.com/contact • Cinebar LUX... -
Page 5: For Your Safety
CAUTION The speaker is intended for private This signal term indicates a use. low risk, which, if not avoided, may result in minor or moderate injury. NOTICE This signal term warns you of potential damage. • Cinebar LUX... -
Page 6: Safety Notes
Only parts that match the original mains adapter near heat sources specifications may be used. (e.g. heaters, ovens, other heat • Only use the accessory products generating equipment such as specified by the manufacturer. amplifiers etc.). • Only use the device indoors. • Cinebar LUX... - Page 7 • If your amplifier is set to full volume, it may produce very high sound pressure. This may have • Cinebar LUX...
- Page 8 • Do not operate the device in wet rooms and protect it from dripping and splashing water. Make sure that no vases or other liquid-filled objects are located on or near the device in order to prevent liquid from penetrating the housing. • Cinebar LUX...
-
Page 9: Explanation Of Symbols
Please only turn in batteries and rechargeable batteries which are empty! *) labelled with: Cd = cadmium, Hg = mercury, Pb = lead • Cinebar LUX... -
Page 10: Overview
• Carefully open the box and care- fully lift the device out of the box. CAUTION Risk of injury/damage! The red rubber loops on the back of the Cinebar LUX are just cord holders. – Do not use the loops to carry the device! Package contents (1) 1×... -
Page 11: Controls And Connections
(15) SETUP – push Button to start (10) AUX IN – input jack for Raumfeld setup analogue audio source device (16) POWER – connector jack for (11) LAN – Network connector the mains cord (3) • Cinebar LUX... - Page 12 – select a source (24) Indication LED ® (19) – control Bluetooth device (25) Text field for the menu and and Raumfeld: skip forward information (20) – start/pause playback, switch the Cinebar LUX on and activate last source • Cinebar LUX...
-
Page 13: Remote Control
(37) – Back button (38) – confirm menu, control ® Bluetooth device and Raum- feld: start/pause playback, switch the Cinebar LUX on and activate last source (39) – navigation button, control ® Bluetooth device and Raum- feld: skip back (40) –... -
Page 14: Inserting/Changing The Batteries
– Do not expose batteries and remote control. rechargeable batteries to 4. Screw the lid back closed – it only direct sunlight. fits the right way around and is slightly under tension from the springs. • Cinebar LUX... -
Page 15: Setup/Wall Mounting
The isolation pads can Wall mounting produce discolouration on sensitive surfaces. Proceed with care when mounting the Cinebar LUX on the wall and follow – On parquet, varnished wood the instructions below. and similar surfaces, you You will need the following material... - Page 16 (13). a qualified professional in 7. Now pull the Cinebar LUX down so this case. that the screws slip into the small – Make sure that there are no slot.
-
Page 17: Connecting
Connecting Active or wire- less subwoofer Video game console Wireless rear HDMI speakers HDMI MP3 player/ smartphone TV set USB stick or harddisk AUDIO OUT HDMI OPTICAL Network router • Cinebar LUX... -
Page 18: Tv Set
IN jack (6) (e.g. a sat receiver, Blu ray player, game console). You do not also have to connect this source device to your TV set. The video signal from these devices is looped through and forwarded to the television set via HDMI TV (7). • Cinebar LUX... -
Page 19: Analogue Source
If you use an active subwoofer with a wireless connection, enable the connection in the “Speaker” menu (see page 26). Network To integrate Teufel Streaming into (10) your network, you can use Wi-Fi or the LAN network connector (11). (11) Connect the LAN jack (11) to your router. -
Page 20: Rear Speakers
1. Insert the small plug of the enclosed mains cord (3) in the POWER jack (16). 2. Connect the mains cord with a mains socket. (16) The Indication LED (24) starts to pulse in white. (24) (25) • Cinebar LUX... -
Page 21: Operation
Operation Activating and deactivating – Turn the Cinebar LUX on or to standby with the button (41). (17) (18) (20) – You can also turn the Cinebar LUX on by pushing any button on the device. – By pushing the button (20)/(38), you directly start... -
Page 22: Adjusting The Volume
TV set (if HDMI CEC is supported by the TV set). (25) The volume setting of an external player often affects the volume of the Cinebar LUX. Adjusting the volume of the (27) optional speakers If you have connected a subwoofer... -
Page 23: Equalizer
button (31) to switch stereo widening on and off. Dolby Audio and Dolby mode When playing back Dolby Audio or DTS encoded multi-channel tracks, the message “Dolby Audio” or “DTS” will light up in the text field (25) for three seconds. • Cinebar LUX... -
Page 24: Menu
Menu Use the menu to configure the func- tions of your Cinebar LUX. You can navigate through the menu with the remote control and it will be shown in the text field (25). To use the menu: 1. Push the button (30). -
Page 25: Sound" Menu
As soon as you choose this menu the volume of loud passages is item, the Cinebar LUX searches for decreased. This can be helpful for wireless rear speakers that are ready audio books and when listening in to pair. - Page 26 Menu: Calib. – Test tone for calibration As soon as you choose this menu item, the Cinebar LUX searches for a With this function, you can activate wireless subwoofer that is ready to and deactivate noise as a neutral test pair.
-
Page 27: System" Menu
TV set must support CEC. • Bright. Possible values: 10–100% AutoOn If the Cinebar LUX is in standby, it will LED Br. – LED Brightness wake up as soon as a signal is recog- Determines the brightness of the nised at an input. -
Page 28: Spotify
(37) to cancel. – Push and hold the volume down button – (29) for 8 seconds to reset. The Cinebar LUX will restore the factory default settings. In the process, all wireless connections will be interrupted. • Cinebar LUX... -
Page 29: Setting Up Raumfeld
• Once you have started the app, the setup wizard will guide you through the setup process. • The SETUP button (15) is located on the bottom of the Cinebar LUX: (15) Integration of other devices in an existing Teufel streaming system: •... -
Page 30: Bluetooth Mode
, you can establish a wireless connection between a To play the audio of your external compatible external player and the player on your Cinebar LUX via Blue- Cinebar LUX. The audio output of your ® tooth , connect the devices with each external player is then emitted by the other. -
Page 31: Playback
Cinebar LUX. Interruption of connection If your external player moves out of the range of your Cinebar LUX, the Playback ® Bluetooth connection will be inter- The volume setting of the rupted. -
Page 32: Software Update
Software Update The software of the Cinebar LUX is 3. Insert the USB flash drive into the being continually developed. Expand or host device (mostly the first device, which has been NOTICE installed in your network or the Risk of damage! Expand). -
Page 33: Care And Cleaning
In case of stubborn marks, a mild soap solution may be used. – Do not use caustic cleaning products, white spirit, thinners, petrol or similar under any circumstances. Such cleaning agents may damage the delicate surface of the housing. • Cinebar LUX... -
Page 34: Troubleshooting
“Teufel Cinebar Lux” as the Bluetooth output device. output device. ® Bluetooth connection Set up the Cinebar LUX and/or external impaired by another player in another location. Move to radio system (e.g. cord- another room to test. less telephone, Wi-Fi). - Page 35 Music It is possible that one or more Teufel device(s) do not have a Wi-Fi playback signal or it is too weak. skips or is Place the devices closer to the router, try alternative setup loca- interrupted.
- Page 36 Use a different multiple socket strip or caused by a multiple connect the subwoofer directly to the socket strip. wall socket. It may also help to insert the mains plug in the socket the other way around. • Cinebar LUX...
-
Page 37: Technical Data
You can find further technical data on our website. Technical changes reserved! Declaration Of Conformity Lautsprecher Teufel GmbH hereby declares that this product complies with the requirements of the directives 2014/30/EU, 2014/35/EU and 2014/53/EU to the extent they are installed and used in accord- ance with the instructions of the manufacturer. - Page 38 Please contact our customer service department with any questions, suggestions, or complaints: Lautsprecher Teufel GmbH BIKINI Berlin Budapester Str. 44 10787 Berlin (Germany) Telephone: 00800 200 300 40 (toll-free) Fax: +49 (0)30 / 300 930 930 Online support: www.teufelaudio.com/service Contact form: www.teufelaudio.com/contact No responsibility is assumed for the correctness of this information.
Need help?
Do you have a question about the Cinebar LUX and is the answer not in the manual?
Questions and answers