Page 1
Technical specifications and operating instructions Active 2.1 multimedia speaker set with USB port Teufel...
Page 2
The warranty conditions of the respec- tive manufacturers are valid for third party prod- ucts. If the Teufel product is sold on privately, the warranty may be transferred to the purchaser, providing that the original proof of purchase is also transferred.
Make sure that you know how much weight the Information on spare parts: Lautsprecher Teufel will provide 4 If the appliance has been walls can bear. The appliance must not be placed near sources you with spare parts during the warranty period.
Concept C 2.1 USB, introduction Dear Lautsprecher Teufel customer, Thank you for purchasing the Concept C 2.1 USB. With this Teufel product you have chosen a 2.1 multimedia box set that, despite its extremely compact dimensions and subtle speaker design, delivers excellent sound quality.
Subwoofer We recommend retaining the boxes in order to system is complete. ensure safe transport for any later servicing. The Concept C 2.1 USB is supplied as a complete Please note: system. Please keep the boxes for at least the eight-week return period,...
Adjustable between 80 mend this cable especially if you are operating and 120 cm. the Concept C 2.1 USB on a separate receiver/am- Design: plifier and/or if cables over five metres long are required to bridge the gap to each speaker.
Set-up as a stereo system The closer you place the subwoo- The Concept C 2.1 USB can also be used as a full fer to a wall or corner, the louder stereo system for listening to music in rooms up you can hear the bass playback.
Discman, Walkman and much more. Note Please make sure that the ana- The Concept C 2.1 USB is perfect for direct con- logue cinch input and the USB nection to any common music playback device port are never both connected to a signal source at the same time that has one or two analogue audio outputs.
Page 10
Connection Digital connection to a computer Important Please markedly reduce the vo- A special feature of the Concept C 2.1 USB is its lume BEFORE using the USB port USB interface. of the Concept C 2.1 USB. It sup- plies a level that is considerably...
Page 11
“B” – left channel with the rate speaker pair outputs “A” and “B” , the satel- line-in input left on the Concept C 2.1 USB. lites and the voltage reducer must be simultane- B) Connect the voltage reducer R from the speak- ously connected to the output pair “A”...
Operating elements on the remote control Settings with the remote control All equalisation settings for the Concept C 2.1 USB can be made easily using the remote control. The display field for the settings is located on the front of the subwoofer.
Set the phasing for your satellite speakers here. Electrical and Electronic If the subwoofer and satellite speakers are in ap- Appliance Act.. proximately the same line, set the phase to “0°” , otherwise to “180°” . Teufel · Concept C 2.1 USB...
“180º” can compensate 0° 180° for reduced bass reproduction. In everday use the Concept C 2.1 USB can easily be controlled using the infrared remote control included(see page 12). 14 Teufel · Concept C 2.1 USB...
The there is no signal present. It cannot be avoided Concept C 2.1 USB fuse box can be found above the in this price category. During operation this light mains cable output on the back of the subwoofer buzzing will disappear because it is masked by the (see diagram on page 13, point 9).
Page 16
Technical specifications and operating instructions Concept C 2.1 USB “The satellites hiss” “The satellites crackle” The Concept C 2.1 USB is essentially a very low- Please disconnect the Teufel speaker system from noise system. In the high range area, very good-...
Need help?
Do you have a question about the Concept C 2.1 USB and is the answer not in the manual?
Questions and answers