Software Update; Determine The Version; Installing New Software - Teufel ULTIMA 40 ACTIVE NG Technical Description And User Manual

The software of the ULTIMA 40 ACTIVE NG is being
continually developed. You can download subse-
quent versions from our website and install it with a
®
Windows PC.

Determine the version

– In the menu of the ULTIMA 40 ACTIVE NG, select
the item "System" -> "Softw." -> "Vers.".
Based on the version shown here, you can determine
whether new system software is available on our
website www.teufelaudio.com/software-updates.html.

Installing new software

1. Load the new software from our website.
2. Unpack the downloaded file.
3. On the ULTIMA 40 ACTIVE NG, connect the USB
SOUND jack (17) with your Windows
you can use any type A USB 2.0 adapter cable to
micro B.
4. In the menu of the ULTIMA 40 ACTIVE NG, select
the item "System" -> "Softw." -> "Update".
The question "Start?" will appear on the display
panel.
5. Push the button (42).
The display panel will now only show "Update" and
the button (9) will flash red.
A USB drive "Ultima 40" will be displayed on your
PC.
At this point, you can still cancel the update without
risk by tapping the button
NOTICE
Risk of damage!
– During the following steps, the
ULTIMA 40 ACTIVE NG must not be
switched off and the USB connection must
not be interrupted!
6. Copy the unpacked update file to the "Ultima 40"
drive on your PC.
The update will run in multiple stages and multiple
progress messages will appear on the display
panel.
7. Once the update is complete, the
ULTIMA 40 ACTIVE NG will restart: You will see the
lettering "Teufel" on the display panel.
The new software was installed.
® PC. For this,
(9).

Software Update

(17)
(9)
AUX OPT TV
(42)
• ULTIMA 40 ACTIVE NG 21