Safety And Regulatory Information; Important Safety Information - Motorola PTP 250 User Manual

Power over ethernet injector unit, poe power supply
Hide thumbs Also See for PTP 250:
Table of Contents

Advertisement

Safety and regulatory information

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
This section describes important safety and regulatory guidelines that must be
observed by personnel installing or operating PTP 250 equipment.

Important safety information

WARNING
Power lines
Exercise extreme care when installing antennas near power lines.
Working at heights
Exercise extreme care when working at heights.
Grounding and protective earth
The Outdoor Unit (ODU) must be properly grounded to protect against lightning. It is
the user's responsibility to install the equipment in accordance with national
regulations. In the USA, follow Section 810 of the
No.70-1984
These codes describe correct installation procedures for grounding the outdoor unit,
mast, lead-in wire and discharge unit, size of grounding conductors and connection
requirements for grounding electrodes. Other regulations may apply in different
countries and therefore it is recommended that installation of the outdoor unit be
contracted to a professional installer.
phn-2182_002v000
May 2011
To prevent loss of life or physical injury, observe the safety guidelines
in this section.
(USA). In Canada, follow Section 54 of the
National Electric Code, ANSI/NFPA
Canadian Electrical Code
Safety
and
Regulatory
.
.
.
.
.
I

Advertisement

Table of Contents
loading

Table of Contents