Using the installation wizard
Using the installation wizard
Perform this task to configure the LAN, wireless, date and email attributes of the unit.
This task consists of the following procedures:
x
Starting installation wizard
x
Step 1: LAN configuration
x
Step 2: Wireless configuration
x
Step 3: Date and time settings
x
Step 4: Email configuration
x
Step 5: Confirm installation configuration
Starting installation wizard
To start the installation wizard, select menu option Installation Wizard. The
response depends upon the state of the unit:
x
If the unit is armed for alignment, the Step 5: Confirm Configuration page is
displayed
until the Step 1: LAN Configuration page is displayed.
x
If the unit is not armed, the Step 1: LAN Configuration page is displayed.
Figure 6-14 Step 5: Confirm Configuration page (when unit is armed)
6-14
on page
on page
on page
(Figure
6-14). Select Set Disarmed, Yes to confirm and then Back
Chapter 6 Configuration and alignment
6-14
6-15
on page
6-17
on page
6-20
6-22
on page
6-23
phn-2182_002v000
May 2011