Using the installation wizard
Step 4: Email configuration
Step 4 of the Installation wizard is for configuring email notifications
The attributes are described in
Next.
Figure 6-18 Step 4: Email Configuration page
Table 6-4 Step 4: Email Configuration attributes
Attribute
Admin Email
Email From
Email Server IP
Address
Email Server Port
6-22
Table 6-4.
Update the attributes as required and select
Meaning
The email address to which the PTP 250 will send the alert
messages.
The email address used by the PTP 250 to log into the email
server. This must be recognized by the server.
The IP address of the networked email server.
The port number used by the networked email server. By
convention the default value is 25.
Chapter 6 Configuration and alignment
(Figure
phn-2182_002v000
6-18).
May 2011