Adding and dispensing process chemicals
Refill indicator
Dispensing rinse
aid
46
Close the reservoir.
Wipe up any spilled rinse aid.
When the fill level is low in the (DOS 2) supply container for rinse aid
you are reminded to refill it.
Confirm the message shown with OK and
refill the rinse aid as described.
The dispensing concentration is set by Miele Service.
– If there are spots of water left on items after reprocessing, then the
dispensing concentration is set too low.
– If clouding or smearing appears on items, the dispensing
concentration is set too high.
In either case contact Miele Service and have the dispensing
concentration reset.
Refill rinsie aid