Refill indicator
Dispensing
rinsing agent
Adding and dispensing chemical agents
Screw the cap back on.
Wipe up any spilled rinsing agent. This prevents over-foaming
occurring during the next programme.
When the fill level is low in the (DOS 2) supply container for rinsing
agent you are reminded to refill it.
Confirm the message shown with OK and
refill the rinsing agent as described.
The dispensing concentration is set by Miele Service.
– If there are spots of water left on items after reprocessing, then the
dispensing concentration is set too low.
– If clouding or smearing appears on items, the dispensing
concentration is set too high.
In either case contact Miele Service and have the dispensing
concentration reset.
Refill rinsing agent
47