F Igure 5.16 Upgrading The Wbs24 S/W Via The Network Booting (2) - Samsung OfficeServ 500 Service Manual

OfficeServ 500 Wireless LAN Service Manual/Ed.00
Then the following screen will show up. After entering the MAC Address, IP
Address and File Name, click the [Update] button.
" Enter the MAC
address of AP
where to receive
the file from
# Enter the IP
that AP is to
be assigned for
2) Turn off the power of WBS24 and turn it on again. Then upgrading is performed
automatically. If upgrading is not performed and the error LED is repeated,
verify the connection status of the wired LAN or the setting status of
TFTP/BootP server. If upgrading is normally completed, the WLAN, LAN and
WLI LEDs will be turned on as a Blue color after booting. Verify the S/W
version on the web screen.
© SAMSUNG Electronics Co., Ltd.
Figure 5.16 Upgrading the WBS24 S/W via the Network Booting (2)
CHAPTER 5. Maintenance
$ Enter the pathe and
name of the file
that AP will receive,
or select the file
by clicking the browser
at the botton
% Click the Update
button
Page 5-17