Chapter 4. Mmc Programming; Before Programming; Programming Overview - Samsung OfficeServ 500 Service Manual

CHAPTER 4
MMC Programming
This chapter describes the MMC programming procedures related to the wireless
LAN function.
1

Before Programming

This section introduces the basic concepts, the phone buttons used for programming,
and the cautions before starting the programming procedure.
1.1

Programming Overview

The OfficeServ 500 System settings can be easily modified using a connected digital
phone, and the program used to change the system settings through a phone is called
the MMC(Man Machine Communication). The program used for system setting
through a connected laptop computer or a PC is called the PCMMC. The MMC
programs are classified into a program that the subscriber can program and a program
that the subscriber cannot program, depending on the three subscriber levels :
Engineer, Operator, and Subscriber. The Engineer and Operator programming
requires a password for each programming, but the Subscriber programming does not
need a password.
© SAMSUNG Electronics Co., Ltd.
Method of MMC programming
Only the MMC programming procedures related to the wireless LAN are introduced in
this chapter. Refer to the 'OfficeServ 500 Programming Description' for the overall
system MMC programming procedures.
Page 4-1