Leakage Current Measurement - ABB EXCOUNT-II User Manual

1.3 Make measurements
Select alternative with the
Then press the
Leakage current measurement (see 1.3.1)
Read surge counter data (see 1.3.2)
Resistive leakage current measurement (see 1.3.3)
Full measurement (all of the above)
Back to main meny

1.3.1 Leakage current measurement

Select sensor ID to read data from with the
Start the reading by pressing
A successful transmission is marked with
A failed transmission is marked with
If the transmission was unsuccessful, an error code
will be displayed.
Back to read data menu
1.3.2 Read surge counter data
Select sensor ID to read data from with the
Start the reading by pressing
A successful transmission is marked with
A failed transmission is marked with
If the transmission was unsuccessful, an error code
will be displayed.
Back to read data menu
key.
key.
2501en EXCOUNT-II Users Manual
Transceiver menu system
Progress bar
Progress bar
A
A
S
Error code
Error code
11