Converting Chart To List Or Graph - ABB COM600 series Data Historian Operator's Manual

1MRS756739
5.1.7.
COM600 series, Version 5.0
Data Historian Operator's Manual
Table 5.1.6-1 Clipboard actions
Action
Copy Data to Clipboard
Averages
Begin values
Raw data
Values with step of
Values with sample count
Statistics
Time value
Time unit
Number of samples
Show status with HTML format
Use display format of variable

Converting chart to list or graph

Figure 5.1.7-1 From chart to list display
To List: In the chart pop-up menu, the To List -command converts the chart from a
graphic format into a list format.
Description
The Copy Data to Clipboard dialog is displayed with chart pop-
up menu.
Picks the average values of the chosen intervals.
Picks the values at the beginning of the chosen intervals.
Picks a chosen number of sample values (with max. count only)
The number of retrieved data samples is defined based on a
time interval (default) The samples are interpolated.
The number of retrieved data samples is defined based on a
sample count. The samples are interpolated.
Exports the data to a statistical application (Not applicable to
raw data).
The interval used to sample the variable. The default value is
the "width of the column" defined in the display.
The unit of interval.
The number of samples taken from the variable.
No significance in the Statistical Tool (selected).
No significance in the Statistical Tool.
Chart_to_list.jpg
55