GE MDS Master Station Technical Manual page 44

Description - User defined identifier for this connection - 0-34 characters
•
Type - Identifier of the type of interface - Do Not Change
•
Enabled - Checked indicates Enabled (DEFAULT). Disable will prevent usage.
•
Eth Phy Rate - Choose the Ethernet speed support setting (DEFAULT ALL)
•
- Eth 10Mb Half
- Eth 10Mb Full
- Eth 100Mb Half
- Eth 100Mb Full
Vlan Mode - Virtual LAN Setting.
•
- None (DEFAULT)
- Access - Use this if this interface is intended to be a member of only a single
VLAN.
- Trunk - Use this if this interface is intended to be a member of multiple VLANs.
Enabled - Enable or disable the use of an IP address
•
Forwarding - Indicates if IPv4 packet forwarding is enabled or disabled on this interface.
•
True (DEFAULT) / False
Mtu - The size, in octets, of the largest IPv4 packet that the interface will send and
•
receive. Range 68-65535 - 1500 (DEFAULT). (Advanced setting)
40
Figure 5-1. ETH1 Configuration Screen
MDS™ Master Station MDS 05-6399A01, Rev. E