Field Data Of Iso Transponders; Rf300 - Siemens SIMATIC RF300 System Manual

RF300 system planning
4.2 Field data for transponders, readers and antennas
4.2.2

Field data of ISO transponders

Observe the following information for field data of ISO transponders:
● A maximum median deviation of ±2 mm is possible in static mode (without affecting the
● The field data are reduced by approx. 15% if the transponder enters the transmission
RF310R reader
MDS D100
MDS D124
MDS D160
MDS D324
MDS D424
MDS D428
MDS D460
1)
All values are in mm
RF340R reader
Table 4- 14
MDS D100
MDS D124
MDS D139
MDS D160
MDS D324
MDS D421
MDS D424
MDS D428
MDS D460
All values are in mm
44
field data)
window laterally (see also "Transmission window" figure)
Length of the transmission
window (L)
Combination with the RF310R is basically possible, but is not recommended because the antenna
geometries for the reader and transponder are not ideally matched.
RF340R reader
Length of the transmission
window (L )
x
Operating distance (S
50
30
36
40
Operating distance (S
System Manual, 11/2009 - Zwischenstand 17.09.2009, A5E01642529-04
) Limit distance (S
a
2...78
2...22
2...25
2...30
) Limit distance (S
a
)
g
90
30
37
38
)
g
SIMATIC RF300