Table of Contents
Advertisement
Operating the washing machine
16
Control panel
a
Display
When the machine is switched on, the welcome screen appears
briefly followed by the first program or the last program started.
b
Function buttons
These buttons can be allocated specific functions depending on
the status of the machine. These appear in the display above the
buttons and are highlighted when selected.
The first 6 programs can be selected directly using buttons 1 - 6.
Further programs can be selected by pressing and holding but-
ton 6 .
c
Start button
The light ring around the button flashes when a selected program
can be started. The selected program starts when the start button
is pressed. After a program has been started, the display content
can be shown again by pressing this button.
d
Optical interface PC
Using PC software, data can be transmitted to and from the con-
trols to a PC.
The optical interface on the control panel provides the connection
point.
e
Power on
For switching the machine on
f
Power off
For switching the machine off
g
Emergency shut-off
The emergency shut-off switch puts the machine into a safe state
in the event of danger or in order to prevent danger. The emer-
gency shut-off must be positioned so that it is directly accessible
in the event of an emergency. Caution, the machine is not discon-
nected from the power supply!
When the hazard has been removed, the switch is released by
turning it clockwise.
When the "START" button is pressed again, the interrupted pro-
gram continues.
Advertisement
Table of Contents
