Rear Wheel 3 - Malaguti PHANTOM F 12 MAX 125 Workshop Manual

REMOVING THE REAR WHEEL
125 cc VERSION
(Remove muffler, rear wing and rear calipers)
•
CAUTION!!!
Before disassembly, hold the centre
chassis section to prevent the vehicle
falling over.
Disassemble the arm as follows:
Undo the bottom screw (V - F.115) of the right shock
absorber and turn it towards the rear side.
Undo the screws (V2 - F.115).
Caution!!! When refitting, put the long
screw in the top section and the short
screw in the bottom section (F.115).
Undo the nut (A - F.115) and remove the wheel.
Caution!!! When refitting, insert all
parts in the right order and grease
them.
REMOVING THE REAR WHEEL
200 cc VERSION
(Remove muffler, rear wing and rear calipers)
•
CAUTION!!!
Before disassembly, hold the centre
chassis section to prevent the vehicle
falling over.
Disassemble the arm as follows:
Undo the bottom screw of the right shock absorb-
er (V - F.116) and turn it towards the rear side.
Undo the screws (V2 - F.116).
Undo the screw (V1 - F.116) and remove the sup-
port of the hydraulic transmission pipe.
Remove the split pin (A - F.116), remove the pro-
tection, unscrew the nut and remove the wheel.
Caution!!! When refitting, insert all
parts in the right order and grease
them.
09.03
ISSUE
CHASSIS
DISASSEMBLY
125 cc
200 cc
V
SECTION 3
A
A
V
2
V
V
1
V
2
A
- CHASSIS
A
CHAPTER
F.115
F.116
65
PAGE