HP A6602 Installation Manual page 86

Step5 Lift the end of the chassis cover and then pull the chassis cover away from the bottom part of Lift the end of the chassis cover and then
the chassis, as shown below. the chassis, as shown below.
Figure 6-4 Remove the chassis cover
Interior Structure
With the chassis cover removed, you can see the interior components of the A6602 With the chassis cover removed, you can see the interior components of the
Figure 6-5 Interior stru
(1) Slot 1
(3) Fan
(5) Built-in CF card
Installing and Removing Blank Panels Installing and Removing Blank Panels
Blank Panel Structure
Installed in Slot 1 or Slot 2 of the Installed in Slot 1 or Slot 2 of the A6602 rear panel, a blank panel can prevent dust f
entering the router chassis.
Remove the chassis cover
Interior structure of the A6602
pull the chassis cover away from the bottom part of
(2) Slot 2
(4) Memory slot
(6) Power supply
rear panel, a blank panel can prevent dust from
A6602 router.