HP A6602 Installation Manual page 78

12 11673608 Nov/15/2007 05:39:50 M
|0 Exit
=====================================================================
Enter file No:
Enter the file number, select 1, and the system displays:
Modify the file attribute:
=====================================================================
|<1> +Main
|<2> -Main
|<3> +Backup
|<4> -Backup
|<0> Exit
=====================================================================
Enter your choice(0-4):
You can set the file type to M (main) or B (backup) or cancel the setting by selecting a choice
from 1 to 4. For details of each type of files, refer to
page 5-1.
In the example, 1 is selected and the system changes the attribute of the file main.bin from of B
to M + B.
Set the file attribute success!
Now, the attribute of the file main_bak.bin automatically changes from M to N/A.
Setting application file attributes at the CLI
In the following description the files main.bin and main_bak.bin mentioned above are taken as
examples.
# Change the attribute of the file main.bin from B to M + B.
<HP> boot-loader file main.bin main
This command will set the boot file. Continue? [Y/N]:y
The specified file will be used as the main boot file at the next reboot!
Now the attribute of the file main.bin has changed from B to M + B and the file will be used as
the main application file at the next boot, while the attribute of another existing file main_bak.bin
has automatically changed from the original M to N/A.
You can verify the changes of the file attributes by viewing all the files through the file control
sub-menu.
Select 2 from the file control sub-menu. The system displays the following information:
'M' = MAIN 'B' = BACKUP
=====================================================================
|NO. Size(B) Time
|1 11673608 Nov/15/2007 05:39:50 M+B
12 11673608 Nov/15/2007 05:39:50 N/A
|0 Exit
=====================================================================
Enter file No:
For details about the boot-loader command, refer to HP SR6600 Routers User Manual.
Setting Configuration File Attributes
Setting configuration file attributes on the BootWare menu
You can modify the file attributes on the BootWare menu. For details about configuration file
attributes, refer to "Configuration
cfa0:/main_bak.bin
"Software Components and
'S' = SECURE
Type Name
cfa0:/main.bin
cfa0:/main_bak.bin
Files" on page 5-2.
'N/A' = NOT ASSIGNED
|
|
|
|
|
|
|
Functions" on
|
|
|
|