Delay Start - Miele TCE 630 WP Operating Instructions Manual

Delay start

Selecting
 Touch the  sensor.
 lights up brightly.
 Touch the  or  sensor repeatedly
until the required delayed start time
appears in the time display.
– The selection is made in 30-minute
increments from  (minutes) to 
(hours), and after that in one hour
increments up to .
– If you keep the  or  sensors
pressed, the time will continue to
increase/decrease.
– If you touch the  sensor again, the
selected time is deleted.
Starting
 Touch the Start/Stop sensor.
– Start/Stop and  light up.
– The   sensors go out.
– Delay start times of more than  will
count down in hours and then in
minutes until the start of the
programme.
28
– The drum will turn briefly every hour
until the start of the programme to
reduce laundry creasing.
Changing
 Touch the Start/Stop sensor.
 You can change the time with the 
 sensors.
 Touch the Start/Stop sensor so that
the delay start period continues.
Adding or removing laundry
 You can open the door to add/
remove laundry.
– All programme settings will be saved.
– You can change the drying level, if
required.
 Close the door.
 Touch the Start/Stop sensor so that
the delay start period continues.
Cancelling a programme
 To cancel, turn the programme
selector to .