Energy Saving Tips - Miele TCE 630 WP Operating Instructions Manual

Energy saving tips

To avoid unnecessarily long drying
times and high consumption of energy:
– Make sure your laundry is spun at the
maximum spin speed before drying.
The higher the spin speed, the
greater the savings that can be made
in energy and time during drying, e.g.
approx. 20% energy can be saved if
spun at 1600 rpm instead of
1000 rpm.
– Load according to the optimum
amount of laundry recommended for
the programme being used. This will
mean that the energy consumption
for the amount of laundry is at its
most economical.
– Make sure that the room temperature
is not too high. If there are other heat
producing appliances in the room in
which the dryer is located, make sure
the room is well ventilated and switch
the other appliances off, if possible.
– Clean the fluff filters in the door
opening after every drying cycle.
Please refer to "Cleaning and care" for
information on cleaning the fluff filters
and the plinth filter.
20
– If possible, make use of time-
variable, low-cost electricity tariffs.
Ask your energy supplier for
information. Your tumble dryer's
Delay start function will be useful as
you can select when during the next
24 hours you want drying to start
automatically.