Removing The Laundry At The End Of The Programme; End Of Programme/Anti-Crease; Removing The Laundry - Miele TCE 630 WP Operating Instructions Manual

4. Removing the laundry at the end of the programme

End of programme/Anti-crease

Programme end:  lights up and the
Start/Stop sensor goes out.
After the programme has finished, the
drum continues to rotate for a max. of 2
hours at intervals to reduce creasing.
There is no Anti-crease with Woollens
handcare.
See "Programmable functions - 
Anti-crease".
Energy saving
– 10 minutes after the end of the
programme, the Start/Stop sensor
will begin to flash and the display will
go out.
– The dryer will switch off automatically
15 minutes after the end of the Anti-
crease phase (with programmes
without an Anti-crease phase it will
switch off 15 minutes after the end of
the programme).

Removing the laundry


Never open the door before the
drying process has finished.
 Reach under the door grip and pull
the door open.
 Remove the laundry.
Check that all items have been
removed from the drum.
If items are left in the dryer, they
could be damaged by overdrying
when the dryer is used the next time.
 Turn the programme selector to .
A signal sounds until the dryer switches
off automatically.
 Remove the fluff from the 2 fluff filters
in the door opening (see "Cleaning
and care - Fluff filters").
 Shut the door with a gentle swing.
 Empty the condensed water
container.
Drum lighting
The lighting helps to ensure that all
items are removed from the drum.
The drum lighting will go out
automatically to save energy.
27