Wireless Connection On Windows® Xp; Connection By Selecting Ssid From List On Windows® Xp - Hitachi EM-G21 User Manual

5.4 Wireless Connection on Windows® XP
To connect the user PC running Windows® XP to the Gateway via wireless LAN, you
may follow either of the procedures below.
 Select SSID from list (Subsection 5.4.1)
 Directly type SSID (Subsection 5.4.2)
Of these, only the latter is available if ESSID Stealth is enabled on the target SSID.
5.4.1 Connection by Selecting SSID from List on Windows® XP
1. If you have not turned on the Gateway and/or the user PC, first start up the Gateway
and then start up the user PC.
2. Disconnect the LAN cable if connected between the user PC and the Gateway.
3. On the user PC, click Start and click Control Panel.
4. Click Network and Internet connections.
5. Click Network Connections.
6. Right-click Wireless Network Connection and select View Available Wireless
Networks from the drop-down menu to open the "Wireless Network Connection"
window.
7. In the list of SSIDs, select the SSID value you determined in Subsection 5.1.1
(emg21-●●●●●●-1 for SSID-1 and emg21-●●●●●●-2 for SSID-2 where ●●●●●●
depends on the actual unit).
8. In "Security key" field, type the Security Encryption Key value you determined in
Subsection 5.1.2.
9. Ensure that the message on the "Wireless Network Connection" window changes
from "Acquiring network address" to "Connected."
Note: If the message does not change to "Connected," entry of a wrong Security
Encryption Key value is suspect. Click Disconnect button and redo Steps 3
through 9.
10. Close the "Wireless Network Connection" window and other open windows if any.
- 21 -