Z-Wave - Eurotronic Spirit Z-Wave Plus Installation & Operation Manual

6 Z-Wave

Command Class Description
Association Allows to associate with other Z-Wave devices.
Association Group Allows to group associations.
Information
Basic Provides access to basic functionality.
Battery Returns the current battery level of the device.
Configuration Allows to configure the device settings.
Device Reset Locally Informs the Z-Wave Controller that the device was factory reset.
Firmware Update Allows Over the Air Update of the device.
Meta Data
Manufacturer Specific Provides information about Manufacturer and Product.
Multilevel Sensor Provides the measured room temperature.
Multilevel Switch Provides or sets the valve opening degree of the valve Controlling
the valve opening degree requires manufacturer specific mode.
Notification Informs the controller about critical system events/errors.
Power Level Used to alter the rf-power(required by Z-Wave).
Protection Allows to lock the device(child protection).
Security Allows encrypted Z-Wave Communication.
Thermostat Mode Configures the operation mode.
Thermostat Setpoint Allows to configure the desired room temperature.
Transport Service Handles the transmission of large telegrams.
Version Returns information about the Firmware.
Z-Wave Plus Info Identifies the device as a Z-Wave Plus Device.
*Availability of the Command Class after adding the Spirit Z-Wave Plus to your Z-Wave network.
U Unsecure
S0 Z-Wave Security standard S0
S2 Z-Wave Security standard S2
– 16–
Version Control (C) Security *
Support (S)
2 S U, S0, S2
1 S U, S0, S2
1 S U, S0, S2
1 S U, S0, S2
1 S U, S0, S2
1 S U, S0, S2
3 S U, S0, S2
1 S U, S0, S2
5 S U, S0, S2
1 S U, S0, S2
8 S U, S0, S2
1 S U, S0, S2
1 S U, S0, S2
2 S U
3 S U, S0, S2
3 S U, S0, S2
2 S U
2 S U, S0, S2
1 S U