Unmounting The Spirit Z-Wave; Plus Factory Rese - Eurotronic Spirit Z-Wave Plus Installation & Operation Manual

4.8 Unmounting the Spirit Z-Wave Plus
Remove the Spirit Z-Wave Plus from the Z-Wave network before unmounting it.
Follow the process described in Exclusion and wait until the LCD shows INC.
You can now uninstall Spirit Z-Wave Plus from the radiator.
1.
4.9 Factory Reset
Remove batteries.
Press and hold boost button.
While still holding boost button insert batteries.
The LCD shows RES. Release boost button.
To perform the factory reset press boost button.
Please use this procedure only when the network primary controller is missing or otherwise inoperable.
RES
Press Boost button
to perform reset.
2.
DEF
Defaults restored
– 13–
Node
XXX
removed