Related Manuals for Barbeques Galore CDBL
Summary of Contents for Barbeques Galore CDBL
- Page 1 ASSEMBLY INSTRUCTIONS FOR YOUR NEW CORDON BLEU BENCH TOP UNIT You will need: 1 adjustable spanner 1 phillips head screwdriver Cordon Bleu Bench Top CDBL and Cart MC4CBL(available separately)
- Page 2 Make sure you have all parts Cordon Bleu Bench Cabinet Contents List 1 X Bench Top X Cover Plate 1X Cross Brace 2X Magnets (CP9095646) (CP9095647) (CP9095263) 1 x Drawer 2 x Drawer Runners Bolt Pack (CP9095648) includes: ( pre-assembled to bench top ) ( pre-assembled to (CP9095657) bench top )
- Page 3 Attach The Magnets To The Cross Brace WHAT YOU NEED 1 X Top Panel 2 X Magnets 4 X M3*12 Screws Screw the magnets to the cross brace. Ensure the magnetic strips are facing outwards. Fit The Cross Brace to the cart WHAT YOU NEED 4X M6*15 screws Fit the cross brace as shown, allowing it to rest on the side panel...
- Page 4 Attach The Bench Top To The Cart WHAT YOU NEED 4X M6*15 screws a. Place the top bench onto the top of cart. b. Working from inside the cart, t the screws into the front and rear holes from underneath into the bench top. Firmly tighten all four screws into The threaded inserts in the cart.
- Page 5 Fit Cover Plate Fit the cover plate into the base shelf of the cart to cover the cylinder hole. NOTE: Do Not use this cover Plate when a cylinder is stored Inside.
- Page 6 If joining adjacent carts: If you are joining two carts together, e.g. a bench and a sink, then first assemble each unit onto its respective cart as above. Adjust the carts heights to match each other, and join the adjacent carts as detailed below.
- Page 7 If you are attaching optional side shelves: Attach The Folding Side Shelf Brackets WHAT YOU NEED Optional shelves ( code : MC2CDFFL ) includes: 2 x shelves Remove these screws 2 x brackets 8 x M6*30 long screws a.Remove the 4 screws on side panel as shown. b.Screw the shelf bracket to each side of the bench using 4 long screws plus the 2 long screws pre- tted into the bracket.
- Page 8 （ supplied with the shelves ) If you have 2 side shelves repeat for the other side.
- Page 9 G.L.G. Australia Pty Ltd (ACN 001 185 002) Building A2, Campus Business Park, 350-374 Parramatta Road Homebush NSW 2140 cdb_bench_0815 Ph. 02 9735 4111...
Need help?
Do you have a question about the CDBL and is the answer not in the manual?
Questions and answers