Blomberg BRFB1920SS Installation Instructions Manual page 40

CONFIDENTIAL

Connect the electrical plug to the socket on the product.

Start the refrigerator and make sure it is energised. (You can check if the lamps of the freezer compartment
are on or off to see if the product is operating)
IMPORTANT INFORMATION:
You can use tape and similar protectors on parts you think this is necessary to protect the edges of the furniture
when placing the product.
WARNING:
The plug of the product must be accessible after installation. If the plug is not accessible after installation, the power
must be cut off from the main switch.
WARNING:
Make sure that the mains cable is not jammed when placing the product.

Push the product carefully towards the cabin to place it. If there is strain during the placement of the
product into the cabin:
o The floor might be rough or uneven
o Adjustable feet might be loose (please see the relevant section to learn how to adjust the adjustable
feet)
39