Wiring Connection - Kenwood DPX-5100BT Instruction Manual

INSTALLATION/CONNECTION

Wiring connection

Antenna terminal
To front speaker (left)/
For 3-way crossover: Mid range speaker (left)
To front speaker (right)/
For 3-way crossover: Mid range speaker (right)
To rear speaker (left)/
For 3-way crossover: Tweeter (left)
To rear speaker (right)/
For 3-way crossover: Tweeter (right)
Car fuse box
Ignition
switch
Car fuse
box
Battery
To the metallic body or chassis of the car
White
White/Black
Gray
Gray/Black
Green
Green/Black
Purple
Purple/Black
Red (Ignition wire)
Yellow (Battery wire)
Black (Ground wire)
Fuse (10 A)
If no connections are made, do not let the wire come out from the tab.
Brown
(Mute control wire)
Blue/White
(Power control wire/
Antenna control wire)
(12 V 350 mA)
Light blue/yellow
(Steering remote control
wire)
IMPORTANT : We recommend installing the unit
with a commercially available custom wiring harness
specific for your car and leave this job to professionals
for your safety. Consult your car audio dealer.
When connecting to an external amplifier, connect
its ground wire to the car's chassis to avoid damaging
the unit.
To connect the Kenwood navigation system,
refer your navigation manual
To the power control terminal when using
the optional power amplifier or to the
antenna control terminal in the vehicle
To the steering wheel remote control
adapter
ENGLISH
33