Wiring Connection - Kenwood KMM-361SD Instruction Manual

Wiring connection

Connecting the ISO connectors on some VW/Audi or Opel
(Vauxhall) automobiles
You may need to modify the wiring of the supplied wiring
harness as illustrated below.
A7 (Red)
Vehicle
A4 (Yellow)
Default wiring
Pin Color and function
A4 Yellow : Battery
A5 Blue/White : Power control
A7 Red : Ignition (ACC)
A8 Black : Earth (ground) connection
Purple ]
B1
: Rear speaker (right)
Purple/black [
B2
B3 Gray ]
: Front speaker (right)
Gray/black [
B4
White ]
B5
: Front speaker (left)
B6 White/black [
Green ]
B7
: Rear speaker (left)
Green/black [
B8
KMM-361SD KMM-120Y
Fuse (10 A)
Yellow (Battery wire)
Ignition wire (Red)
Red (Ignition wire)
Unit
Battery wire
(Yellow)
Red (A7)
Yellow (A4)
Front output
Rear/subwoofer output
Antenna terminal
If no connections are made, do not let the wire
Light blue/yellow
(Steering remote
control wire)
Blue/White
(Power control wire/
Antenna control wire)
Brown
(Mute control wire)
ISO connectors
Other models
Rear/subwoofer output
come out from the tab.
STEERING WHEEL
REMOTE INPUT To the steering wheel remote control
adapter
REMOTE CONT
To the power control terminal when using
ANT CONT
the optional power amplifier, or to the
P. CONT
antenna control terminal in the vehicle.
To the terminal that is grounded when
either the telephone rings or during
MUTE
conversation. (To connect the Kenwood
navigation system, consult your navigation
manual.)
ENGLISH | 13