Make A Call; Improve The Voice Quality; Make The Settings For Receiving A Call - Kenwood DPX-5100BT Instruction Manual

BLUETOOTH®

Improve the voice quality

While talking on the phone...
1
Press the volume knob to enter [FUNCTION].
2
Turn the volume knob to select an item (see the following table),
then press the knob.
3 2
Repeat step until the desired item is selected or activated.
4
Press and hold to exit.
To return to the previous setting item, press
MIC GAIN LEVEL –10 to LEVEL +10 (LEVEL –4): The sensitivity of the microphone
increases as the number increased.
NR LEVEL LEVEL –5 to LEVEL +5 (LEVEL 0): Adjust the noise reduction level until
the least noise is being heard during a phone conversation.
ECHO CANCEL LEVEL –5 to LEVEL +5 (LEVEL 0): Adjust the echo cancellation delay
time until the least echo is being heard during a phone conversation.

Make the settings for receiving a call

1
Press to enter Bluetooth mode.
2
Turn the volume knob to select an item (see the following table),
then press the knob.
3 2
Repeat step until the desired item is selected or activated.
4
Press and hold to exit.
To return to the previous setting item, press
16
ENGLISH
SETTINGS
AUTO ANSWER
BATT/SIGNAL*
.
* Functionality depends on the type of the phone used.
Default: XX

Make a call

You can make a call from the call history, phonebook, or dialing the
number. Call by voice is also possible if your mobile phone has the
feature.
1 Press
"(First device name)" appears.
• If two Bluetooth phones are connected, press
2
Turn the volume knob to select an item ( 17), then press the
knob.
3
Repeat step
the instructions stated on the selected item.
4
Press and hold
To return to the previous setting item, press
.
1 to 30: The unit answers incoming call automatically in the selected time
(in seconds). ; OFF: Cancels.
AUTO: Shows the strength of the battery and signal when the unit detects
a Bluetooth device and the Bluetooth device is connected. ; OFF: Cancels.
to enter Bluetooth mode.
to another phone.
"(Second device name)" appears.
2
until the desired item is selected/activated or follow
to exit.
Default: XX
again to switch
.