Huawei USG6310 Quick Start page 2

Rear panel
CONSOLE
Default Configuration
The following table lists the default configuration.
Item
GE0/0/0
Administrator account/password
Connecting to the Internet
Collect the information in the following table based on the WAN mode you use and the IP address plan for the LAN. The un-
derlined red texts in the table are examples for reference only.
Item Port
WAN GE0/0/4 WAN Mode
LAN GE0/0/6 IP Address:
Subnet Mask:
DHCP server
1. Set the IP address to 192.168.0.2 (or any other in the range of 192.168.0.2 to 192.168.0.254) and subnet mask to
255.255.255.0 of the corresponding network interface on the administration PC.
2. Open a web browser and navigate to https://192.168.0.1:8443.
3. Enter the user name (admin) and password (Admin@123) in the login dialog box, and then click Login. You need to
change the user password as instructed after the first login.
4. In the Startup Wizard page that is displayed, click Next to access the Basic Configuration page. Change the device
name and click Next.
If the Startup Wizard page is not displayed, click the System tab and choose Wizard > Startup Wizard in the
navigation tree.
1 3
XXXXXXXXXXXXXXXXXXXXXXXXXXX
0 2
3 2
GE0/0/0 GE0/0/4
Administrator
The IP address is 192.168.0.1.
You can use the default account/password (admin/Admin@123) to log in through web or
console.
Static IP
PPPoE
DHCP
10.0.0.1
255.255.255.0
5 7 Secospace USG6000
4 6 RST 12V ; 3A
1 4
2
GE0/0/6
Switch
Intranet
Description
Description
IP Address: 1.1.1.1
Subnet Mask: 255.255.255.0
Default Gateway: 1.1.1.254
Primary DNS: 2.2.2.2
(Optional) Secondary DNS:
User name/Password: user/Password123
-
IP address range: 10.0.0.1 to 10.0.0.254
2
4
4
Request your ISP or
network administrator
to provide the data.
2.2.3.3
The device functions
as a DHCP client.
The LAN IP address range
shall be pre-determined.