Transducer Inputs And Outputs - GE L90 Instruction Manual

6.3 METERING
The above actual values are displayed without the corresponding time stamp as they become available per the recording
rate setting. Also, the recording post-filtering setting is applied to these values.
PATH: ACTUAL VALUES
DCMA INPUT xx
Actual values for each dcmA input channel that is enabled are displayed with the top line as the programmed channel ID
and the bottom line as the value followed by the programmed units.
PATH: ACTUAL VALUES
RTD INPUT xx
Actual values for each RTD input channel that is enabled are displayed with the top line as the programmed channel ID and
the bottom line as the value.
6
6-22
PMU 1 CONFIG CHANGE
MESSAGE
COUNTER: 0
METERING TRANSDUCER I/O DCMA INPUTS
DCMA INPUT xx
0.000 mA
METERING TRANSDUCER I/O RTD INPUTS
RTD INPUT xx
-50 °C
L90 Line Current Differential System
6 ACTUAL VALUES
Range: 0 to 65535

6.3.12 TRANSDUCER INPUTS AND OUTPUTS

DCMA INPUT xx
RTD INPUT xx
GE Multilin