Panel-Mounted Instrument - ABB 9438 User Manual

...2 MECHANICAL INSTALLATION
...2.2.1 Wall-mounted Instrument – Fig 2.4
Position 'U' bolts on pipe
Position plates over 'U' bolts
4
Secure transmitter to mounting plate
Fig. 2.4 Pipe Mounting
1
Loosen the retaining screw
on each panel clamp.
Remove the panel clamp and
anchors from the instrument case.
Refit the panel clamps to the case, ensuring
5
that the panel clamp anchors are located
correctly in their slot.
Secure the instrument by
6
tightening the panel clamp
retaining screws.
4
1
2
3
Secure plates
Cut a hole in the panel (see Fig. 2.5 for dimensions).
Instruments may be close stacked to DIN 43835.
2
Fig. 2.6 Panel Mounting
2.2.2 Panel-mounted Instrument – Figs 2.5 and 2.6
Dimensions in mm (in)
96 (3.78)
96
(3.78)
Fig. 2.5 Overall Dimensions
3
3
191 (7.52)
12 (0.47)
+0.8 +0.03
92 (3.62 )
–0 –0
+0.8
92
–0
Panel Cut-out
+0.03
(3.62 )
–0
Insert the instrument into the
panel cut-out.
4