13 Additional Information
56
En
Setting the display brightness
You can adjust the brightness of the display to suit the lighting conditions of the room.
For example, in a brightly lit room you'd probably want the display brighter than in a
room with low lighting.
•
Press SYS then FL DIMMER.
Press
repeatedly to set the display brightness. There are five levels.
FL DIMMER
Switching the TV system output
DVD and Video CD discs are recorded in either PAL or NTSC format. This setting
determines which TV signal format is output to your TV.
1
With the system in standby, press SYS then SETUP.
Press the @ or # button until you see
2
DVD VIDEO in the display.
Use the % and fi buttons to select a video out setting.
3
•
– default setting (video is output according to the disc loaded:
DVD VIDEO AUTO
PAL if it's a PAL disc; NTSC if it's an NTSC disc). If you have a multi-system TV, leave
this setting as
.
AUTO
•
– output is always PAL, even when an NTSC disc is loaded. Use
DVD VIDEO PAL
this setting if your TV is PAL-compatible only.
•
– PAL Video CDs are output as NTSC; PAL DVD discs cannot be
DVD VIDEO NTSC
played on this setting. Use this setting if your TV is NTSC-compatible only.
4
Press ENTER to make the setting.