Table of Contents
Advertisement
Making an audio or a video recording
The following steps show you how to make
an audio or a video recording from the
built in tuner, DVD, CD or from an audio
or video source connected to the system
(CD player, satellite tuner, etc.). Recordings
can be made to a recorder connected to the
or
inputs/outputs.
1
1
AUDIO
VIDEO
The system's volume, balance, bass, treble,
Midnight and surround sound settings
have no effect on the recording.
Notes
• You can't record a source connected to
the digital inputs from the analog
outputs.
• You can't record DTS encoded discs
from the analog outputs.
1
Select a source to record.
Use the
MULTI CONTROL
remote, or the
FUNCTION
(remote or front panel) to select the
source.
2
Prepare the program source.
Tune to the radio station, load the CD, etc.
For a video recording load the video, etc.
3
Insert a blank tape, MD, etc.
into the recorder connected to
either AUDIO 1 or VIDEO 1 and
set the recording levels.
Refer to the instructions that came with
the recorder if you are unsure how to do
this. Most video recorders set the audio
recording level automatically— check
your video's instruction manual if you are
unsure whether yours has manual
controls.
4
Start recording, then start
playback of the source
component.
Making a digital
recording
The system has one optical digital audio
output (for
make a digital recording from this system
hook up this optical output to the optical
input of your digital recorder. The source
(CD, DVD, etc.) must be digital also; this
system doesn't convert analog inputs to
digital. If you're recording from an
external digital component, also make
sure that you've selected the digital input
for that component (see page 19).
Note: If you want to record DVD disc,
check that the digital output settings
correct. See page 36 for detailed
instructions.
1
Select DVD or VIDEO V-2 as the
buttons on the
digital source to record.
button
Use the
remote, or the
(remote or front panel) to select the
source.
2
Prepare the program source.
Load the CD, MD, etc.
3
Insert a blank MD, CD-R, etc.
into the recorder connected to
the optical output of AUDIO 1.
4
Start recording, then start
playback of the source
component.
See the instructions that came with your
recorder for detailed instructions on
recording.
8 Making Recordings
). If you want to
1
AUDIO
buttons on the
MULTI CONTROL
button
FUNCTION
33
En
Advertisement
Table of Contents
