Table of Contents
Advertisement
7
Measure the difference X between the standard line and laser beam.
8
If X is within 1 mm, no adjustment is required. If the difference exceeds 1 mm, move on to
the next adjustment.
Horizontal calibration and adjustment
1
Move the RL-SV2S in the direction of the arrow to align the standard line and laser beam.
2
While pressing the
Press the
key.
3
Press either the
position. (check with the buzzer sound from the LS-80L)
4
Press the
key.
key, press the
key or the
key to align the laser beam with the LS-80L indicator
key.
8. Check and Adjusting
55
Hide quick links:
Advertisement
Table of Contents
Need help?
Do you have a question about the RL-SV2S and is the answer not in the manual?
Questions and answers
Topcon RL SV2S I have a problem with a lot of errors Can't calibrate
Common calibration errors with the Topcon RL-SV2S include:
- E-65: Slope function error – Turn the instrument off and back on.
- E-70’s: Leveling incomplete – Turn the instrument off and back on.
If errors persist, contact Topcon or your dealer.
This answer is automatically generated